Hellcat Hauler
Active Member
- Joined
- Oct 6, 2023
- Messages
- 78
- Reaction score
- 207
Custom built, PITA lol.
I built this for a little more viper vibe and trying to disguise my hitch a little.
I bought the viper diffuser fins off ebay, they are stainless steel and come powdercoated textured black. I originally bought a 3'x2' 3/16" black plastic sheet , measured and cut it out. It was too flimsy when I bolted the fins on. So I bought a 3'x2' sheet of ACM black composite. I tracked the pattern onto the acm and cut it out. Bolted the fins on and mounted to the truck. I used 1"x1/4" aluminum bar to make mounting brackets. Once I mounted it, I came to realize that the front was going to catch air. So I took the original template, had to heat it and bend it, and riveted it to the front of the ACM. I cut it to fit, made more brackets, and boom.
![20240413_185003.jpg 20240413_185003.jpg](https://www.vtcoa.com/data/attachments/50/50840-699f88ccfc439f1f3726cf5942a7aedc.jpg)
![20240413_184948.jpg 20240413_184948.jpg](https://www.vtcoa.com/data/attachments/50/50838-7b19b774b03abc357d6b898abedf185a.jpg)
![20240413_184954.jpg 20240413_184954.jpg](https://www.vtcoa.com/data/attachments/50/50839-13f9caea0a73802fbd03842e37b331b9.jpg)
![20240413_185016.jpg 20240413_185016.jpg](https://www.vtcoa.com/data/attachments/50/50841-11554d781a5d1a4270fb6687475a5d50.jpg)
![20240413_185028.jpg 20240413_185028.jpg](https://www.vtcoa.com/data/attachments/50/50842-2ad777aef4467a70c340f7cd609d20ed.jpg)
![20240413_185116.jpg 20240413_185116.jpg](https://www.vtcoa.com/data/attachments/50/50843-e49e22ea692241d350144c052216243a.jpg)
I built this for a little more viper vibe and trying to disguise my hitch a little.
I bought the viper diffuser fins off ebay, they are stainless steel and come powdercoated textured black. I originally bought a 3'x2' 3/16" black plastic sheet , measured and cut it out. It was too flimsy when I bolted the fins on. So I bought a 3'x2' sheet of ACM black composite. I tracked the pattern onto the acm and cut it out. Bolted the fins on and mounted to the truck. I used 1"x1/4" aluminum bar to make mounting brackets. Once I mounted it, I came to realize that the front was going to catch air. So I took the original template, had to heat it and bend it, and riveted it to the front of the ACM. I cut it to fit, made more brackets, and boom.
![20240413_185003.jpg 20240413_185003.jpg](https://www.vtcoa.com/data/attachments/50/50840-699f88ccfc439f1f3726cf5942a7aedc.jpg)
![20240413_184948.jpg 20240413_184948.jpg](https://www.vtcoa.com/data/attachments/50/50838-7b19b774b03abc357d6b898abedf185a.jpg)
![20240413_184954.jpg 20240413_184954.jpg](https://www.vtcoa.com/data/attachments/50/50839-13f9caea0a73802fbd03842e37b331b9.jpg)
![20240413_185016.jpg 20240413_185016.jpg](https://www.vtcoa.com/data/attachments/50/50841-11554d781a5d1a4270fb6687475a5d50.jpg)
![20240413_185028.jpg 20240413_185028.jpg](https://www.vtcoa.com/data/attachments/50/50842-2ad777aef4467a70c340f7cd609d20ed.jpg)
![20240413_185116.jpg 20240413_185116.jpg](https://www.vtcoa.com/data/attachments/50/50843-e49e22ea692241d350144c052216243a.jpg)