JMB Fascia Saver Prebuy

JMB Justin · May 1, 2009

Finally some pics, we have some work to do on getting the exact contour, but this material is awesome, black, very flexible, etc., will not shatter or crack. Bolts up in minutes, very easy install. You can see where we need to do some work still (it will be out the same amount the entire way around), but we are close, should be getting the final one cut early next week. Im going to have a prebuy on these for $60ea. and they will go up to at least $75 after this 2 week prebuy (ends 5/15). Shipping is probably going to be $30 because of the size (lower 48 states). If I am able to find a cheaper way to ship I will refund the difference. You can paypal to [email protected] or call me at 314-540-1541. These will not ship until the 3rd week in May.

Justin

TREKER · May 1, 2009

06 too?

JMB Justin · May 1, 2009

Ill make sure, but it should be the same.
Justin

black pearl · May 1, 2009

Looks really nice Justin:rock: :rock: Do you have pictures on the mounting underneath:dontknow:

JMB Justin · May 1, 2009

I do not, it uses all the stock bolts along the edge of the fascia and only extends back approx 1" past them (towards the back of the truck). Very lightweight!
Justin

Dom426 · May 2, 2009

thank you you know im in

amtrucker22 · May 2, 2009

I am in Justin. Let me know how you want payment!

JMB Justin · May 2, 2009

You can paypal to [email protected] or call me at 314-540-1541. Total is $90, if I find cheaper shipping I will refund the difference.
Thanks!

Venom Power · May 2, 2009

MUAHAHAHA... Good... Good.... Good.....

Just in time since I will be placing an order for mids soon.

viperhauler · May 2, 2009

the only question that i have...since mine is torn all to hell...

say you were coming out of a steep driveway, if you didn't have the saver, the fascia would more than likely "slide" and scrape the bottom of the fascia...which you can't see anyways, most of the time...but if the fascia saver was to "catch" on the asphalt or concrete somehow, would your protector have the possibility to tear off the bolts that actually hold the facia itself on...or would the saver "break away"...as the saver is obviously much cheaper to replace than the fascia itself?

Dom426 · May 2, 2009

viperhauler said:
the only question that i have...since mine is torn all to hell...

say you were coming out of a steep driveway, if you didn't have the saver, the fascia would more than likely "slide" and scrape the bottom of the fascia...which you can't see anyways, most of the time...but if the fascia saver was to "catch" on the asphalt or concrete somehow, would your protector have the possibility to tear off the bolts that actually hold the facia itself on...or would the saver "break away"...as the saver is obviously much cheaper to replace than the fascia itself?

what do you plan on doin 4 wheelin that thing or what? it will still slide across it!

viperhauler · May 2, 2009

i have a steep driveway....

JMB Justin · May 2, 2009

It will slide way before it breaks, the material is very flexible.

viperhauler · May 2, 2009

thank you, kind sir

eddie102870 · May 2, 2009

im in on this bro. wil send you some money monday.:rock:

johnnybravo · May 2, 2009

I'm in too bro. I'll send the payment next week.

RedSrt007 · May 2, 2009

SRT8 GC Too??! !

MYTRAM · May 3, 2009

Is a pic possible from out front at bumper level, now or when done? Thanks!

Coley 1334 · May 26, 2009

hey justin think you could do something like this with your current part? maybe CF :dontknow:

cuz that would really set the front bumper off

1fast10 · Jun 5, 2009

count me in please, if any are left

JMB Fascia Saver Prebuy

Active Member

Full Access Member

Active Member

Full Access Member

Active Member

Full Access Member

Active Member

Active Member

Full Access Member

Well-Known Member

Full Access Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Full Access Member

Active Member

Full Access Member

Full Access Member

Attachments

Full Access Member

Support Us