Haven't been on the forum much lately, been extremely busy! I've been meaning to get on here to post some new goodies that I did. V1R UD pulley, Venom TB, JTSVP oil lines and catch can, and I finally got around to getting my tails and 3rd brake done. Oh I also did the a/c bypass when doing the pulley (thanks Rick). I have to say doing the UD pulley and the TB at the same time was definitely a noticeable gain! Can't wait to get back to the track to see if I can shave off another 1/10 or 2.
A few new add-ons
- Thread starter stealth78
- Start date
12.95 @ 107 ... that was at 5265lbs
Last edited:
Are you on street tires or DRs and have you done any weight reduction?
Yes on DR's, no I can't launch for shit! Lol! It was my first time at the track and even with DR's I still only pulled off a 2.0 60'. And for weight reduction... she is still a fat pig.
LOL! They are all fat pigs! I weighed mine at the local scrap yard last time I was there and it was 4990#. And as for your launching you just need practice, you will get there. If you ran a 12.9 on a 2.0 60ft. you will run a 12.5 on a 1.8 60ft., general rule of thumb is for every .1 your 60 ft. drops your e/t generally drops .2
Jeremy, glad to hear you finally got all that stuff put on. How is the throttle response with the new throttle body? Did you remove that vibration damper from the shifter?
I would challenge you to find a single truck on our forum that can substantiate that rule of thumb.
Everyone should take notice that your '06 RC doesn't weigh any different than the 04's and 05's.
Done, I dropped from a 13.09 to 12.87 when I dropped my 60' from 2.0 to 1.9.
trussman
Active Member
Any mods or weight reduction between those runs?
Good question! I believe I removed the tailgate and spoiler and added the V1R UDP.
trussman
Active Member
Then the gain is non 60' related if that is the case. :chain:
Same old stuff going on here, buddy. That herniated disc in my back is destroying my time in the gym.
You need to remove that bushing. Changes the whole feel of the shifter!
Yeah, what he said!
Does that mean your truck made all the previous passes on it's own? That's not safe, Mr. Non-Safe Mod.Next time I go to the track I'll just install the driver mod.
Support Us
Become A Supporting Member Today!
