Recent content by By By Money

I've had my 50QC for almost 2 Years and have never been able to encourage anyone to race. That was until last night. I'm driving along behind a Roush 427R Mustang and coincidentally I took the same 2 turns as him. On the 3rd redlight turn he opens it up, so like any SRT owner would I had to give...

Hey Guys help would be appreciated. My 05 SRT10QC is going thru oil like crazy. It currently has 75,000 miles and I cannot see any oil on the floor or any burnt oil coming out the tailpipe. Is there anything in particular I should look at. i.e. known gaskets that like to leak. Thanks

What shocks did you put on it?

Octane rating has NOTHING to do with the power output of an engine. If you put a 93 Octane fuel in a vehicle designed for 89 octane you will not damage anything other than the amount of money in your pocket. The only reason there are different octane ratings is to allow a higher...

Use my QC as a daily driver and get 10.2 average. Only issue is the ride sucks. It is lowered and I wish I had a different kit on it

Having another daily driver would be like having the most beautiful wife in the world and then going with a hooker so that you didn't ruin your wife.

Well, I put in the tune. :):D:):D:):D:):D:):D:):D:):D:):D:):D:):D:):D:):D:):D:):D Nothing more to say.

OK guys. I don’t post that much but I have to say I’m very excited :D as my SCT Tuner from Torrie is due to arrive today. The only problem is is that so is the snow and it’s my daily driver. Put the tuner in tonight or wait :bawling: , that is the question. The picture below is from...

First Off, I know this is in the wrong section but I can't yet post in the "Wanted" section. I am looking for the following parts (preferably used) for an 05 QC. 1) Set of QA1 shocks or similar (Lowered 2" front and 5" rear) 2) Rear CAT delete pipes.

Thought about a CTS-V

Have about 5" of snow in Knoxville. Had to go to work and lets just say it was an interesting drive in the SRT

Where was my invite. I only live 30 min away

:confused: Sorry, forgot the pic

OK guys, What's your opinion on this for a hood grill insert. Was thinking about making it from either polished or brushed stainless steel.