Recent content by Stupuff

It's not really to print, just design. so things line up. I was looking to make a v10 version of; https://s.catch.com.au/images/product/0148/148185/64c9dd88c1b7a590459115_w803h620.webp or...

I'm looking to create my own intake manifold, but it would be my first time doing so. I currently have a Roe Racing manifold under my Lysholm 3.3L blower, but it's showing a lot of where from... many removals and reinstalls (long stories). So i want to make an intake that would be one piece and...

what are the chances that you still have one?

So a few questions and things. I've been deployed and will be back in 2 months. Hows the outside world? Are there flying cars yets? Did we defeat the gun grabbers? What happened to Roe Racing? Does anyone know where I can get files or a physical intake manifold for the viper the work with a...

so, i took the head covers off and found a loose rocker. thought it could be a bent rod, rolled it and found it to be fine. i was going to take off a different rocker and compare/replace the other one and see if it still rattles. a mechanic friend states it is likely a collapsed lifter. I...

agreed, thank you for the insight

So, the past couple of weeks has me finally fixing up Alice. But I need your help. I start her up and... She sounds like that. As well, gives me a P1499 (hydraulic fan solenoid) Please help

this may have been discussed...but this is tyyyyyyyyyyyyyyyyiiiiiight... can one do this to a Ram with much dificulty?

I've seen a few posts elsewhere, but they are long in the tooth, so i thought i would ask here i'm looking to have my tires staggered in size and would like to try 355/35r22 on the back to give a wider contact patch. but...WHERE CAN I FIND THEM? it's getting hard in Canada to find even the PZeros

Its engine assembly grease.... its meant for assembling internal engine parts and breaks down into the oil with heat...

yes, initially thought that was the problem. did an oil change to confirm the oil was correct level and a good filter

as stated, the engine had NO oiling issues or lifter noise after the cam install. only after 2 years of sitting in storage. it just so happens that i had installed a low vacuum supercharger bypass valve from kenne belle to use with my cam. (the reason it sat for 2 years). Im curious if the pump...

So after 2 years of my truck sitting, I finally bought a low vacuum supercharger bypass valve to fix my running issues after installing a lumpy boost cam (for the record I had oil pressure after the cam install but not after starting up after sitting for 2 years). It started up after installing...

where is an easy place to tie in? oil filter sandwich plate? block?