Search results

I prefer the HKS SSQ. They seem to work pretty well. Never had a Greddy. -Muzzy

I'd take one if someone gave it to me...Then I would sell it and use the money to buy an 08' Viper :D -Muzzy

Looks great.:rock: I can't wait to have one in my paw. Thanks for the update. -Muzzy

I guess I have never see such a consistent amount of vacuum/pressure (for those physicists that say, “There is no such thing as vacuumâ€￾) as RPMs increase. You would think with ten cylinders and 505 cubic inches you would see more of a change. Is that indicative of not enough air being...

That graph doesn't seem quite right. The problem I see is that you are getting the data from the MAP sensor. I would like to see what the MAP voltage is over the same RPM range. It looks like the MAP signal is being clipped at about 2500 RPM. I am willing to bet the sensor voltage is being...

Does any know the big end bore diameter, center to center length, and big end width? I do not see these values on the spec sheet. Most aftermarket SBC rods have a pin bore diameter of .927. I am sure you can get pistons with the correct pin diameter for that bore. Or the larger BBC .990. If...

Yet another reason I do my own wrenching. Good luck faslane505, it sounds like everything will be taken care of. Hopefully they will get it right this time. -Muzzy

The only thing I would be concerned with on the bed rug is moisture getting trapped between the rug and the paint causing it to cloud or corrode. I have never had one though, so I have no idea how well it breathes. -Muzzy

Who made the filter? I was planning on going with one of THESE at my next oil change. I won't buy it if it was the same one you and Gary tried. Thanks -Muzzy

I mist mine with Finish 2000 and wipe it down every time it gets waxed. It keeps it looking shiny and black. Just make sure you tie down anything you put in it, otherwise it will slide around. I like Line-X purely for the fact I had it on my 3/4 ton. I used to throw concrete, retaining...

How funny is that. The union goes on strike at the same time Chrysler is shutting plants down to reduce inventory. The big three is taking it in the pants by low overhead foreign automakers and the Union wants more. When there are no more US plants because overhead costs were too high, who...

X360 rules!!!:rock: :rock: Blows the rest away as far as functionality. Plus try getting Halo 3 on a PS3...NOT! I use my X360 as a media extender for my Windows Media Center. I can stream audio, video, and TV through my X360. If you have a thumb drive full of MP3's, just plug it in to...

I have Line-X done in mine under the rail. I don't haul anything so I prefer leaving the top of the bed painted. -Muzzy

That is awesome!! I wish I had one of those. I would have billet everything around the house (dog bowl, door knobs, picture frames, toilet flushing handle, etc...). :laugh: -Muzzy

I love the T-handle. Mine has been passed through the last 3 trucks I've owned. It is somewhat of a good luck charm for me to have that Hurst T-handle. -Muzzy

It is the oil filter that makes the startup noise. It is resonance caused by oil system pressurizing. When the truck sits for a long time without being run, the oil slowly drains out of the system back into the pan (even with a anti-drain back valve in the filter). When you start the truck...

The thread and o-ring diameter is what matters. I don't believe the extra length would hit anything. I will opt for the 25-462 when I buy mine. -Muzzy

I would go for the longer one. That is what I am going to get at my next oil change. -Muzzy

The VTCOA special edition would be cool with me if everyone else agrees. Whatever is easiest for Sean since he is giving us a heck of a deal. :rock: -Muzzy

I have something good to say... Sean did a great job with the GB. I appreciate Roe Racing doing R&D on a throttle body and willing to offer it at a good price. I also would like to give kudos to Sean and Roe Racing for honoring their price even though some that committed backed out forcing...