Latest activity
-
Also check your bump stops front and rear hahaha -
Thanks for posting this - turns out mine was missing them too. I ordered, installed, and now my hood closes solidly like it should. -
Posting this for archiving, attached is a stock HP Tuners for 2006 Ram SRT-10. It may work for 04-05s as well. Extract .hpt from the... -
Pporkchopzz4 replied to the thread Grille Overslam Bumpers.Thanks for posting this - turns out mine was missing them too. I ordered, installed, and now my hood closes solidly like it should.
-
Srt10650 reacted to VIPR PWR's post in the thread Bumpers or no bumpers at the rear frame with
Like.
Thanks .. ill be checking those out ... -
Srt10650 reacted to VIPR PWR's post in the thread Bumpers or no bumpers at the rear frame with Like.
Just noticed ,, are there suppose to be rubber bump stops in the pics ?
-
Srt10650 reacted to kyle's srt10's post in the thread Bumpers or no bumpers at the rear frame with Like.
Just the bump stops. Very common for the age of the trucks not to dry rot and fall off. The slapper bar ones do the same.
-
Srt10650 replied to the thread Bumpers or no bumpers at the rear frame.Searched through my notes throughout the years and these are the part numbers I have. I’d check them out when you get a chance, they’re...
-
-
Srt10650 replied to the thread Bumpers or no bumpers at the rear frame.These were mine 6 years ago, they were already dry rotted and brittle.
-
-
kyle's srt10 replied to the thread Bumpers or no bumpers at the rear frame.Just the bump stops. Very common for the age of the trucks not to dry rot and fall off. The slapper bar ones do the same. -
SSilverThrone654 replied to the thread Pinched wire in frame.I’ll mess with it some more later to find out where the wire goes, the taillights were already in rough shape to begin with. Prior owner...
-
SSilverThrone654 replied to the thread Pinched wire in frame.My issue turned out to the bed driver side taillight itself, I disconnect the driver side and the reverse lights work just fine (wasn’t...
-
SI’ve recently purchased this 05’ SRT10 and while trying to diagnose the issue of no reverse lights, I can across this White/Brown wire...
-
-
Kiwi SRT10 replied to the thread For Sale in NZ.There are a few supercharged ones here, on a standard engine with 4lb boost. (boom) I know there is a Hennesey Venom 800 twin turbo in...
-
Yah but only one is a Plum Crazy forged with striker heads lol
