Search results

http://www.vtcoa.com/forums/showthread.php?t=42113 sorry Post #20

Its out of a RC silver in color. build date is 8th hour on december 11, 2003 It was sold out of CA and has no service info. The last odometer reading is at 18,417 on 12/16/05 Just thought i would give ya a little history on where it came from. This info is in reference to...

HAHA sweet!!!! I love simple fixes like that.

I personally like the recon stuff better. Good quality!! Plus Tony can get them for ya :rock: :congrats:

I have the clear third brake light on my 2500 and all the lights are leds including the cargo lights. Its made by Bully. The cargo light is kind of bluish light and not very bright and the brake light is bright red :rock:

I talked to my tech and he said to take the clamp on the rubber boot off and it should pull apart. Also on the vibrating issue: Make sure all the U-joints are lined up along both drive shafts as if they are lined up like +x it will cause a vibration.

HAPPY BIRTHDAY :party: :party: :party: :party: :party: :birthday: :birthday: :birthday: :birthday: :birthday: :birthday: :birthday:

HAPPY BIRTHDAY :birthday: :birthday: :birthday: :birthday: :birthday: :birthday: :birthday: :rock: :rock: :rock: :rock: :rock: :rock: :rock:

I have seen two techs (one on each side) do it in 20 minutes. :rock:

There are bolts along the top along the windshield. I believe two bolts on each side of the dash. (left and right) A couple on the bottom middle of the dash. And you have to drop the column down. You dont have to disconnect the speedo or any wiring. The dash only needs to be moved away...

Yea the dash has to be pulled. You just have to unbolt it and move it back basically setting it on the seat. If its your first time probly take 2-3 hours.

It sounds like its the recirc. housing that needs to be replaced. If you remove the blower motor and a door falls out its probly the problem. The recirc. door is right above the blower motor and if it breaks off and falls down it can block the air flow. Like Stinker and Santeen said...

Nice :rock: Looks great :burnout:

I would say if you put your stock suspension on then check all of it to make sure the axle is on the leaf springs straight. It sounds like the pinion angle is wrong or the rear axle isnt on the leafs straight.

Just put the pedal to the floor!! You wont know what to do to slow down lol

Thanks buddy ill check it tomorrow and hopefully ship it tomorrow. Ill also get you the price on shipping the bracket.

Bump I have 3 white banners left :marchmellow:

i think you can leave a couple of the tab on and cut the flat piece off. Then use the 3M double sided tape to attach it to the grille. Then after its on use a zip tie around the tabs that are still on the emblem.

Happy St. Pattys day everyone

0 black and 3 white left