Search results

When you swap a rc rear end in to a QC and use the QC drive shaft you will need a 1350/1410 universal joint

And I got to swapping it into the QC to include the Rc rear end

Removed the complete suspension from the rc

It's in the garage getting some parts removed from it

I sold the Oem bed cover, its not really my style. I removed all the badges from the truck but the left the viper powered on the oem hood. I installed new head light and fog lights. I swapped over my other grill to see what it would look like. then i swapped the some black honeycomb mesh...

So it has begun. We found a nice Qc to make into a killer family machine since we have out grown the Bad Snake I got it home and spent a few days cleaning the paint, and swapping over some of my carbon fiber stuff stuff from the Rc

I've replaced front suspension bushings to polyurethane on our trucks with low mileage and the oem were dry rotted even though the truck had low mileage. I think it is one of the cheapest and best upgrades and the truck handles way better. here is the information on a complete kit or just...

Ordered a large one[emoji106]

Kyle Pm me and i have all the measurements in my notes at home. I didn't have to cut my drive shaft with my current height and hacked up frame and branded title. You guys make me laugh out loud.

I would also pull the super charger piping off (good time to clean the throttle body too)and see if you have any oil in them, if so you need a new impeller shaft seal. Ditch the paxton blow off that is mounted to the reservoir and put one closer to the throttle body unless you don't mind the...

Welcome

welcome

I'm getting ready to do a QC build, Yes I'm going to use the DJM lower control arms in the front.

You can text me at 410-739-2508

nice work, retrofit source for the win, i used those all the time for vw/audi when i did a couple of sets.

I'm in Md(by BWI), I have plenty of experience in the automotive industry. I have serviced a few trucks in my area for people that don't want to get taking for a ride by the dealer. If your not sure about who I am check out my build thread.

I am between 780-800HP Range

would this drive shaft work with a 6 speed swap also in a QC?

Nice work boss

Nice work gents.