Search results

Quick question... are the intake manifold bolts Aluminum?

4 inches for the wide one and 1 inch for the smaller stripe with a 1 inch gap in between

i Did mine at 4" wide

oh ok, yea after market shocks sound like the best option in your case. I might do the same way later down the road. I live in Idaho, lots of country rough roads. I kinda prefer my stock ride height up in front ha

:dito:

Oh really? Hm.. Arnt you lowered?

I will soon retire the beast from all year round driving to summer only. So i am not all too concern about tread wear. Now i also dont want to completely go crazy with the specs. I guess what im asking is how much Toe, Camber, and Caster is good enough for a little bit more sporty handling then...

Front end is stock and will stay stock height. Im only droping the rear to level.

Thanks for the info. I must agree on the pop. thats exactly what is happening with mine as well. When i back up and turn there is a pop. Rather then trying to figure out which ball joint, i bought all of the ball joints and tie rod ends ha. I will make sure that they now its a Ram SRT10 and...

Hey guys. first off.... The beast just hit 100k Miles :(:bawling:... Bought it with 72k miles though and rebuild the motor at 78k nothing but good memories and a few wins under its belt with me :D. So anywho, I will be doing the 100k Maintenance essentials. (already has all new clutch and...

Great info.. I just ordered ALL new Poly Bushings and Leveling block from tony.

Wat he says ^^.... I just barely swapped mine out. I was having the same issue as you and i ended up taking an axle and the carrier to a shop. $25 was all.

R.I.P Kyle

Of course i do, atleast for 15 mins. But it needs to be moving for the trans oil to warm up

Hey Guys... Winter is here along with 7 Deg. Weather. I need to change my trans oil here quite soon and i was wondering what you guys recomend i put in? Every morning it the shifter is stiff between gears. Im assuming the oil thickens up over night and it takes about 5 mins of driving for it...

LOVE IT!

Ive been looking for a 3D model for years!! Im gonna try and convert this to Solidwork and through some wheels i modeled ha