Search results

More pictures, you can see the differences between both bushings. And also the new hardware it comes with.

For the QC mounts there are 2 different kinds of bushings, the instructions explain which ones go where. The stock ones were definitely way over due, very soft(can easily bend with your hand. The polyurethane ones are definitely more beefier, here are some more pictures.

Both sides complete, haven’t taken it out for a ride yet. But they sure look good. Truck on ramps should give you enough room to replace all mounts(either 8 for QC or 6 for RC). I used a rubber chalk block to lift the body off the frame to remove the mounts. The front belly pan give you access...

Anytime, tried for the longest to find some for the 1500 and nothing. Good thing it worked out.

These are the 2 part numbers they have listed. If you have a single cab I would make sure you check that you have 6 mounting points before you purchase them. I checked my quad cab before I purchase them to make sure I had the 8 mounting points. Good thing it worked out for me, driver side is in...

They don’t list any for the 1500 rams, they only list the 2500. So I kind of took a gamble on them, but luckily it worked out. I’ll get you some part numbers later today when I get home.

Wanted to update the thread, still haven’t had time to replace the upper and lower control arm bushings with the energy suspension polyurethane bushings. And still haven’t got the rear helper bags. But decided on replacing my cab mount bushing with energy suspension polyurethane bushings. This...

04-05 Ram were on the 1500 chassis frames and the 06s were on the 2500 frames. Springs might be a little softer because they’re for the hemi trucks and the front end is a lighter. Just really depends if you don’t mind it?

Welcome from California!

Do you still have the rear slider wing bolts? If so I’m interested, if you can please send me pictures of the bolts at 650-676-7261. Thanks.

I can’t seem to add pictures, but it’s basically a hard plastic bed liner/mat that just covers the floor(does not cover the tubs or the sides) and has SRT in the middle.

Welcome!

It’s the actual bad mat. I’ll try and post a picture.

Does anyone by any chance have a part number for the SRT bed mat that came with some of our trucks? Thanks.

Some relatively less expensive items and worth the money would be a billet accumulator piston, billet 2nd gear servo kit, billet/heavy duty kick down band strut, billet anchor, billet lever, GM style governor pressure sensor, upgraded metal pressure transducer(I believe the one I bought is for a...

The other day I moved my seat forward and when I went to move it back nothing. Went at little more forward, tried to move back again and nothing(sometimes that would work before). The worst part is I had to drive 3hrs to get back home with my knees to the steering column. I’m not the tallest guy...

I’m in Elk Grove Ca

Heres what I did. You pretty much have to break the stock one off. https://www.vtcoa.com/threads/custom-column-shifter-for-qc.69447/

No worries, not my truck but it’s a Pioneer head unit. If you have the correct adapters it should work with everything else, PAC sells some really good adapters that works with the factory subs/speakers/amps. As far as the bezel, eBay has them (don’t know the price but shouldn’t be more than...

Correct Grant Products make them, they’re about $220. After you purchase it, you can send your stock one in for a core and they’ll reimburse you about $20. But you don’t have to send your core if you don’t want to.