in another 100k you may have an issue... thewelshm
mine was at 180,108 miles when a valve spring broke. It got another 9100 miles after rebuilding and the valve seat dropped into the cylinder....
prayers sent to Texas. thewelshm
My wife bought the very last stock driver seat cover for Christmas for me about 4 years ago. Yellow Fever a member here ( i think that was his...
I have a couple of ground edge deep well sockets that work pretty good on those back ones, in 11mm and 7/16" thewelshm
seen my coil packs 3 times in 3 months, hope I don't see them again for a while. those back inlet bolts suck to get at. thewelshm
Finally done running like a fine-tuned Rolex 14160. How something so simple eluded me for so long. I will post video time for a shower. thewelshm
After changing every sensor ran compression test. no compression on number3. the push rod had not gone into the bucket, so I bent a valve on my...
Update changed Map Sensor, TPS, IAC sensor and the little one in the flex pipe to the air cleaner. No difference last two would be camshaft and...
NONE. so I a have a new crank sensor, so i will do ALL sensors and see where we go. I put permadex gasket sealer on the stock inlet gaskets as...
Ok its all back together with new gaskets (no leaks) new MAP sensor exactly the same issue I took out the IAC and its solid no movement. I think...
ok changed map sensor pulled the inlet and stuck a new gasket in there. going to nip up everything tomorrow and see how we do. Thanks Ronnie stay...
Check engine light came on it feels like it's on 9 cylinders. I checked for spark with the tool, all 10 have spark. putting a set of plugs in...
The truck is running really rich, I'm going to swap TPS and IAC. But I also noticed this one. What is it called and does anyone have a part...
Push rod was wedged pretty good, pulled the head new gaskets on the way. Back to work on it next week. thewelshm
So I'm down to reinstalling rods and rockers and I mistakenly dropped the push rod on number 10 inlet between the gasket and the block, I can see...
THAT SUCKS MATE, THEWELSHM
this may be better. thewelshm
Picked it up and he did a real nice job for $360.00 the culprit is featured valve seat must have cracked during installation, and gave way 9100...
Gut new bolts, gaskets etc., picking up the head tomorrow mate, im interested to see how it looks. thewelshm
Separate names with a comma.