01 gen2 rockers

[01VIPERGTS/ACR]

will these work on my 01? they are 1:7 to 1? are the gen2 already 1:7?:dontknow:http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=230159443331&fromMakeTrack=true&ssPageName=VIP:watchlink:middle:us

never mind...my bad,there is only 16 pcs.but i could get 4 more from crower?

 

[Bone]

It says 1.7 on the box.

 

[01VIPERGTS/ACR]

It says 1.7 on the box.

DOES THE GEN2 ALREADY HAVE 1:7 RATIO OR ARE THEY 1:6?:dontknow:

 

[Bone]

DOES THE GEN2 ALREADY HAVE 1:7 RATIO OR ARE THEY 1:6?:dontknow:

If you are going to shout, find out from someone else.:dontknow:

 

[01VIPERGTS/ACR]

If you are going to shout, find out from someone else.:dontknow:

oops...my bad.

 

[01VIPERGTS/ACR]

wait a second bone... i sold ya a set of tires for your hemi cheap did i not?:dontknow:

 

[JTS VENOM PERFORMANCE]

dont waste ya money they want help
ours , if I am not mistaken are basically 1.7's allready actually .

 

[Bone]

I thought Gen 1s were 1.6s, but not sure about Gen 2s.

 

[01VIPERGTS/ACR]

I thought Gen 1s were 1.6s, but not sure about Gen 2s.

i thought i heard that 1and2 are 1:6?:dontknow: if so than these would raise the lift and duration a hair.

 

[RedSrt007]

Yes, you have 1.6's on your Gen 2....1.7 will help....

 

[ViperTruck2933]

I have a set of OEM 1.7s off my truck. I am now running the T&D rollers.
My OEMs look just like the ones in the EBay pic. I don't think those are Crowers in the ad but I could be wrong.

Here's what my OEMs look like. I might be tempted to let my OEMs go, if you want them. They are collecting dust in my garage.

 

[attila]

I have a Harland Sharp NOS for sale, never put on my gen2.

1.7 of course, anyone interested?