1.5" Rear Lowering Shackle for QC pics

[JR_PRO]

A while back I was looking for before and after pics of a Beltech 1.5" rear lowering shackle for a 2006 QC. No one had both before and after pics. I remember several members wanting to see some pics after the install so here they are. It made a difference to me in that it sits just about level and is not jacked up in the rear any longer. Hope this helps someone looking to do this mod...

Thanks!

BEFORE:

AFTER:

 

[JimTeTe]

Nice Pics ........ Nice Color

 

[DRamSrt10]

Nice pics!! What does the block looks like?

 

[SilvrSRT10]

Nice pics!! What does the block looks like?

Hey Ty, Can't use blocks on the QC. What he used was lowering shackles. They adjust the spring attachment point to lower the back of the truck. The RC and QC are made differently. The RC has the axle on top of the springs so lowering is done with a block and longer u-bolts. The QC axle is below the springs therefore it has to be flipped (put on top of the springs) or lowered with shackles.

 

[DRamSrt10]

Can't use blocks on the QC. What he used was lowering shackles. They adjust the spring attachment point to lower the back of the truck. The RC and QC are made differently. The RC has the axle on top of the springs so lowering is done with a block and longer u-bolts. The QC axle is below the springs therefore it has to be flipped (put on top of the springs) or lowered with shackles.

Ahhh I see! Sorry, my bad but thanks for the info! I learned something new today.

 

[SilvrSRT10]

Ahhh I see! Sorry, my bad but thanks for the info! I learned something new today.

No need to apologize. Glad to share the info. I didn't know something once.........only once.