1500Hp Twin Turbo Heffner Engine

SRT10VENOMOUS

1800HP Club. And climbing
Supporting Member
Joined
May 18, 2006
Messages
6,034
Reaction score
44
Location
Vancover BC Canada
This is not mine but hey looks like a hell of a deal, for a set up like this,, Just a few mods and bolt her into the truck and you can put the smack down on DOM...

http://www.viperalley.com/classifieds/showproduct.php?product=4081&sort=2&cat=5&page=9





Heffner Performance
Engine:
2001 Viper GTS
Recently rebuilt By Heffner Performance
Custom 8.5 to 1 CP forged aluminum pistins
Childs & Albert piston rings
Clevite bearings
Bore: 4.030"
Stroke: 3.88"
Crank: stock
Rods: stock
Cylinder heads ported and polished by Roe Racing
2.02" intake valves, 1.60" exhaust valves
Valve springs upgraded by Roe Racing
ARP head studs
T&D 1.7 ratio shaft mounted rocker arms
Cam: stock
One piece chromoly pushrods

Turbo System:
Heffner Performance Stage One Turbo System
Twin Ball Bearing Garrett GT-35R Turbos
1 3/4" Stainless Steel Turbo Exhaust Manifolds
2 3/4" to 3" Stepped Turbo Downpipes
Two Tial 46mm Turbo Wastegates
Two Tial 50mm Blow Off Valves
Mandrel Bent High Flow Intercooler Plumbing
Polished Stainless Steel Throttle Body Plumbing
High Flow Front Mount Air to Air Intercooler
"T" Style Turbo Discharge Clamps
High Pressure Intercooler Plumbing Connectors
Heavy Duty Engine Mounts
Turbo Oil Feed Lines and Fittings
Turbo Oil Drain Lines and Fittings
High Flow Turbo Inlet Plumbing
Dual High Flow K&N Air Filters
Custom Made Aluminum Turbo Heat Shields
Crankcase Breather Tank
Crankcase Breather Lines and Fittings
Capable of 1100 rwhp and 1200 rwtq

I would like to sell the package complete. Brand new WITHOUT the engine core, it ran almost $60,000. With a new core, it would run around $75,000. The entire package has less than 3000 street miles on it.

Price: $38,000obo


Also have a set of HRE's. They are chromed, not polished, have Michelin Pilot Sport tires all the way around and custom Viper center caps as well. New the package was $8400. Tires have about 90% tread life.

Price: $6000obo
Please email [email protected] for info, questions, or to purchase. My user name VegasSE is the same on all forums, lambopower.com, supraforums.com, turbobuick.com, and viperalley.com


DSC01799.jpg
DSC01798.jpg
DSC01797.jpg
DSC01796.jpg
 
except for the fact that it is a GenII motor. so you need a new intake, refabricate the plumbing for the intake.

plus all the plumbing is viper (genII) specific. you would need alot to get it to work in a truck, plus it wont make 1100rwhp in our trucks, you will loose more thru the drivetrain
 
Twin 61 mm turbos = lame

Stock rods and 1100whp, good luck with that combo, not sure why Heffner repeatedly uses stock rods on 1000+ whp builds.

Justin
 
For $38K, I'd just buy two trucks and big shot of nitrous!

At least I'd have something left to sell after they blew up.:D


Besides that, look at that nasty dampener!:(
Can't afford a buck can of paint?
 
Last edited:
NorCal SRT-10 said:
Put it in a Dakota.
:rock: :rock: :rock: :rock: :rock:
Amen!!!! I almost did that with my dakota R/T club cab... but the bank wouldn't give me the 25 grand to do it so instead I just bought a ram srt :D
 
dead end cruiser said:
:rock: :rock: :rock: :rock: :rock:
Amen!!!! I almost did that with my dakota R/T club cab... but the bank wouldn't give me the 25 grand to do it so instead I just bought a ram srt :D
I would only do that if I had P. Diddy money.
 
This guy must have been eating paint chips while he watched some monkeys build this......

What a Joke!
 

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Back
Top