17"wheels for drag radials?

[SANTEEN]

Just got a set of M&H tires (thanks Jimmy). Now I need a set of inexpensive wheels. Which wheels do you guys recommend and from who should I buy them? Also, most important, what is the proper offset and bolt pattern so that they won't rub the calipers.

 

[TNVIPER]

American Eagle Alloy 058 series 17" (0589-8057 17x10 Polished 5 on 5.5 - Acorn, -24mm offset, 4.5 backspacing, N/I, 2100 lbs., 26 lbs...


Going to be hard to find..AE quit make them and nothing else is out there that I know of...

 

[ramviper10]

PM :ARRESTmeRED04
he said that local wheel shop had them and that they got them from somewhere in dallas, 134.50 each.

 

[SANTEEN]

Will these work? The first ones at the top of the page. The only difference I see are the offset is -25mm instead of -24mm and the backspacing is 4.52 instead of 4.5. Thanks for your help

 

[TNVIPER]

Arrestme ran them with success..

http://www.vtcoa.com/forums/showthread.php?p=750498#post750498



..

 

[SANTEEN]

Arrestme ran them with success..

http://www.vtcoa.com/forums/showthread.php?p=750498#post750498



..

Yeah, the ones in the link are the ones he recommened. I just wanted to know if the slightly different offset and backspacing will work.

 

[TNVIPER]

Yeah, the ones in the link are the ones he recommened. I just wanted to know if the slightly different offset and backspacing will work.

I assume so since he ran them..

 

[SANTEEN]

I'm sorry, I didn't post the link. He just checked and told me these will work. They are the ones at the top of the page.
http://www.rimzoneonline.com/pacerRidgeline_17x10.htm

 

[kickinassrt-10]

Just got a set of M&H tires (thanks Jimmy). Now I need a set of inexpensive wheels. Which wheels do you guys recommend and from who should I buy them? Also, most important, what is the proper offset and bolt pattern so that they won't rub the calipers.

Damn buddy you just don't stop buying Before you know it you will be S/C and forging that engine:marchmellow: :marchmellow:

 

[SANTEEN]

Damn buddy you just don't stop buying Before you know it you will be S/C and forging that engine:marchmellow: :marchmellow:

:rock: :burnout:
What untl you go to the track and you have to pretty much baby it off the line in order not to light the tires up. I would have the Challenger SRT 8 if it weren't for that.

 

[kickinassrt-10]

:rock: :burnout:
What untl you go to the track and you have to pretty much baby it off the line in order not to light the tires up. I would have the Challenger SRT 8 if it weren't for that.

Can't wait....when are we gonna set something up?

 

[SANTEEN]

Can't wait....when are we gonna set something up?

I'm going this Friday with a few friends to the Homestaed 1/8th mile. Next Friday I'm going on a cruise. I'll probably go again Friday August 8th.