2 Step and nolift shift installed

[hwmech]

2 Step and nolift shift installed with video

Stock headers and cats custom cat back N2MB WOT BOX
3900RPM 2step 300ms ignition only cut

no popping or flames but it wasnt real hot but I am still going to take the cats out so I dont blow the exhaust apart.


https://www.youtube.com/watch?v=Zjy4xmV_kZU

 

[yellowfever#154]

This is interesting, so you would set this limit to just higher than your shift point? Then keep the pedal to the floor for the entire run?

Is there a way to enable a launch control with this as well?

Maybe these are dumb questions, but Im curious.

EDIT, I rewatched and it makes sense now. Send a link to this setup, and is it simple to install?

 

[AdrianCaF91]

Stock headers and cats custom cat back N2MB WOT BOX
3900RPM 2step 300ms ignition only cut

no popping or flames but it wasnt real hot but I am still going to take the cats out so I dont blow the exhaust apart.


https://www.youtube.com/watch?v=Zjy4xmV_kZU

Can we see a video of you using thr no-lift feature??

 

[hwmech]

So I put a up switch on the clutch so the wot box knows soon as I touch the clutch and it will rev limit the rpms to what ever you set it at while the gas pedal stays down and you shift. Yes it had launch control also so you just push the clutch in and floor the gas and it bounces it at what ever rpm you set it at.

I will have to setup the gopro to do the no lift shifts but just YouTube it to see some srt4 s doing it. It makes the shifts easier and faster

 

[hwmech]

It also has a window switch if you are running nitrous

 

[hwmech]

N2MB Racing

if you join the group everything SRT on facebook they are doing a group buy right now for like $160 or something like that