InfinitySRT
Full Access Member
Putting my Teryx up for sale so I can start a new project. I've had this Teryx since I bought it brand new in 2009, its started off as a green SE . It has 992 miles/141 hrs on it. I would say 85% of the time it sat in a booth on display. I did ride it and enjoy it on my travels all over the country so it has been driven and shows normal ware from riding. It has always been well maintained, Amsoil fluids all around, belt was replaced less than 300 miles ago, never rolled, never put on its side.
1. Custom built ATR roll cage including integrated rear bumper, cooler rack and rear seat conversion which is Ca and AZ legal as rear passenger head height is below cage top.
2. Maier Plastics Sliver
3. AFE intake kit
4. Muzzi Exhuast
5. V Force clutch and machined plate
6. MSD ECM
7. V Force Dyno tune
8. Power Steering kit
9. Full metal skinned door kit
10. Custom embroidered Twisted Stitch Seats, buckets in front, bucket bench rear
11. 4 Point harness for all 4 seat locations
12. Rigid Industries HID head light upgrade
13. ATR frame braces front and rear
14. Full custom audio system with JBL Marine headunit with side out Ipod tray and USB port in glove box, 2 JBL Marine amps, JBL GTO 10” subwoofer in SSV Works center console, 2 pair of 6 ½” Infinity Kappa Marine speakers mounted in SSV Works pods and wireless remote control mounted in steering wheel center.
15. 3 sets of ITP Rims and tires
a. Baja Cross Tires on T4 Beadlocks barely used maybe 150 miles on them, primarily used as display wheels when in booths at shows
b. Terra Cross tires on SS212-Used for the majority of the riding but have life left them, have been on the Teryx since a few days after I purchased it in 2009
c. Black Water tires on ss216-These are brand new and have less than 100 miles on them
16. 3000 lbs Warn winch with new cable
17. LED interior lighting Varad LEDs
I feel like I am leaving off an item or two but that’s the list of major upgrades, if I remember more I’ll update list.
It has normal ware and tear that a Terxy would see that is ridden off road. The driver side lower plastic is cracked and I have stitched it back together with zip ties as this seems to hold up better than anything else. I may purchase a replacement and swap it out I may not. I had some cold rolled steel welded to front fame as the Teryx has a known weak link in the front sub frame, its rock solid now.
Everything I have for it is included (take off parts, spares etc), except for the 40" LED bar and the Rotopax containers as I am going to carry those over to my next build. I've got a ton wrapped up in this but I know nothing seems to hold its value anymore these days. $13,750 For more pics/questions feel free to email me [email protected]
1. Custom built ATR roll cage including integrated rear bumper, cooler rack and rear seat conversion which is Ca and AZ legal as rear passenger head height is below cage top.
2. Maier Plastics Sliver
3. AFE intake kit
4. Muzzi Exhuast
5. V Force clutch and machined plate
6. MSD ECM
7. V Force Dyno tune
8. Power Steering kit
9. Full metal skinned door kit
10. Custom embroidered Twisted Stitch Seats, buckets in front, bucket bench rear
11. 4 Point harness for all 4 seat locations
12. Rigid Industries HID head light upgrade
13. ATR frame braces front and rear
14. Full custom audio system with JBL Marine headunit with side out Ipod tray and USB port in glove box, 2 JBL Marine amps, JBL GTO 10” subwoofer in SSV Works center console, 2 pair of 6 ½” Infinity Kappa Marine speakers mounted in SSV Works pods and wireless remote control mounted in steering wheel center.
15. 3 sets of ITP Rims and tires
a. Baja Cross Tires on T4 Beadlocks barely used maybe 150 miles on them, primarily used as display wheels when in booths at shows
b. Terra Cross tires on SS212-Used for the majority of the riding but have life left them, have been on the Teryx since a few days after I purchased it in 2009
c. Black Water tires on ss216-These are brand new and have less than 100 miles on them
16. 3000 lbs Warn winch with new cable
17. LED interior lighting Varad LEDs
I feel like I am leaving off an item or two but that’s the list of major upgrades, if I remember more I’ll update list.
It has normal ware and tear that a Terxy would see that is ridden off road. The driver side lower plastic is cracked and I have stitched it back together with zip ties as this seems to hold up better than anything else. I may purchase a replacement and swap it out I may not. I had some cold rolled steel welded to front fame as the Teryx has a known weak link in the front sub frame, its rock solid now.
Everything I have for it is included (take off parts, spares etc), except for the 40" LED bar and the Rotopax containers as I am going to carry those over to my next build. I've got a ton wrapped up in this but I know nothing seems to hold its value anymore these days. $13,750 For more pics/questions feel free to email me [email protected]
Attachments
-
DSC_7353.jpg592 KB · Views: 124
-
DSC_7370.jpg662.6 KB · Views: 607
-
Teryx_Moab_Fins and Things_sunset.jpg92.5 KB · Views: 156
-
20141020_192403_resized.jpg255.3 KB · Views: 112
-
20141020_192411_resized.jpg216.3 KB · Views: 40
-
DSC_4795.jpg505.2 KB · Views: 119
-
DSC_4284.jpg723.2 KB · Views: 184
-
DSC_4768.jpg489.8 KB · Views: 100
Last edited: