32x12 M&H tubed slicks w/16" wheels $350 + shipping

[Tork_MoNsTeR]

Im tryin to sell my slicks and wheels cuz Im REALLY tight on money and gotta come up with some $$... They are 32x12 and are tubed. They are 16" wheels and will require caliper shaving... The inside on the back of one wheel is scraped up from the brake bleeder valve scraping. Askin $350 + shipping OBO or I can take them to PCB or somethin....
Make me an offer if interested.... THEY MUST GO!!

 

[Dom426]

so is it 350 or 400???????

 

[Tork_MoNsTeR]

My bad... copy and paste error LOL.... $350

 

[Tork_MoNsTeR]

Bump.... Sorry about the mix up, I fixed it

 

[mysrt10]

what kind of wheels are they? do you know how much they weigh?

 

[Tork_MoNsTeR]

Im not sure of the brand or weight... The wheels themselvs are really light. The tires are fairly heavy but not ridiculous....

 

[DevilDawg3097]

what kind of wheels are they? do you know how much they weigh?

quit bein a puss and buy the damn things. Prick put this up the day after I bought my tires. and believe me there worth it the rims alone. 16 inch rims are on back order (all the ones that fit out trucks:dontknow: that I liked) so the only ones where ealge alloys. Just buy the things you cheap bastage:marchmellow:

 

[Tork_MoNsTeR]

quit bein a puss and buy the damn things. Prick put this up the day after I bought my tires. and believe me there worth it the rims alone. 16 inch rims are on back order (all the ones that fit out trucks:dontknow: that I liked) so the only ones where ealge alloys. Just buy the things you cheap bastage:marchmellow:

Damn youre a good salesman... LOL!

 

[DevilDawg3097]

Damn youre a good salesman... LOL!

:marchmellow: :marchmellow: Its true though I would of bought them If you would of posted them a day earlier

 

[Smokey]

quit bein a puss and buy the damn things. Prick put this up the day after I bought my tires. and believe me there worth it the rims alone. 16 inch rims are on back order (all the ones that fit out trucks:dontknow: that I liked) so the only ones where ealge alloys. Just buy the things you cheap bastage:marchmellow:

i would....but ....they dun fit my truck....:dontknow:

 

[Tork_MoNsTeR]

:marchmellow: :marchmellow: Its true though I would of bought them If you would of posted them a day earlier

They were up a lil while back. I reposted them here

 

[Tork_MoNsTeR]

Bump....

 

[Venom Power]

DAMMIT!!! If they were 17" I would have picked hem up without saying a word..

 

[Tork_MoNsTeR]

Dammit... LOL... Somene tak these damn things. Id even be willing to bring them to PCB if youre gonna be there...

 

[sully1369]

I am very interested but how much work is it to shave the calipers? Will a grinder n 30 mins do the job? Howd you do it and how long did it take you? Thanx
Sully

 

[Tork_MoNsTeR]

It depends on the grinder and discs u use... it took me about 4 hrs to do mine.... but of course I was dickin around too, lol

 

[OSO]

It depends on the grinder and discs u use... it took me about 4 hrs to do mine.... but of course I was dickin around too, lol

Last time i used a grinder on the truck while i was dickin around, it took me two days to figure out why my tail lights to quit working and an hour to repair the harness


Now keeping with the spirit of this thread, Damit i would buy them if i had enough power to justify it:marchmellow:

 

[Tork_MoNsTeR]

Last time i used a grinder on the truck while i was dickin around, it took me two days to figure out why my tail lights to quit working and an hour to repair the harness


Now keeping with the spirit of this thread, Damit i would buy them if i had enough power to justify it:marchmellow:

You were out of tail light fluid werent ya?? eve all been there , LOL!

 

[Tork_MoNsTeR]

If someone buys them Ill toss them in the truck and bring them to PCB GTG..... for free

 

[OSO]

If someone buys them Ill toss them in the truck and bring them to PCB GTG..... for free

What good would that do if they are not going