Go to someone else. Your dealer has their head in a dark aperture.
They obviously know nothing about the SRT 10.
You will love the 4:88's.
They obviously know nothing about the SRT 10.
You will love the 4:88's.
488 rearend change
- Thread starter Ironhead
- Start date
andrew heywood
Full Access Member
$$$$$
How much for 3rd member, plus install?
How much for 3rd member, plus install?
FATJACK
Full Access Member
Did you go with cryoed spider gears also?? When do you get it back?
andrew heywood
Full Access Member
Ironhead
thank bro tony is the man:marchmellow: .......:rock: :burnout:
thank bro tony is the man:marchmellow: .......:rock: :burnout:
FATJACK said:
no i did not get the cryo cause stink does not carry them i would have to send them off to get it done and i could not wait ,,i wanted to get the rear end done ,,,giter done NOW,,,because i did not get in early this morning cause wifie wanted my manhood so i was late cause of her lol so i should get it back monday around noon i hope
Last edited:
FATJACK
Full Access Member
Much rather have my truck at home than have a piece of tail but I am much older than you too!!
FATJACK said:
Dang......I feel the same way.....
you old fart ,,im selfish i want both ,,trust me after working on my fence all day and then hear they cant finish it pissed me off ,,,they said there was a shime for the pinion gear missing from kit so they had to order it ,,,grrrrrrrrFATJACK said:
then to top it off my fat ass mexican nabor who was suppose to help do fence cause its on both our porperty line never came out to help me i had to do it all myself ,,,then i drove around to his street and i see three cars in his freaking driveway so i have no dought they knew i was out there working on it and they were sitting in that house watching me work ,,,sumbitches
Last edited:
I would do the cryoed while it is apart......even if it takes a few days.......it will take longer...and cost more.. if you break a spyder in macon...
FATJACK
Full Access Member
Remember what I told you today, DO NOT accept it if the rear end has a whine in it, it will not get better it will get worseIronhead said:you old fart ,,im selfish i want both ,,trust me after working on my fence all day and then hear they cant finish it pissed me off ,,,they said there was a shime for the pinion gear missing from kit so they had to order it ,,,grrrrrrrr
TNVIPER said:
been driving the hell out the beast with a stock rear gear and have not trashed it or clutch i have 32000 on it now with the origanal clutch and rear end
:congrats
lus i made it through panama city with same setup then drove 650 miles home afterwards ,,,now if jack gets that new giggle gas setup of his done and sells me his old one then i might start beefing it up
Last edited:
FATJACK said:
10-4 i told them today it better be right or i will make a U turn and bring it back, they told me they call the makers of setup and got the instructions from them to set it up right ,thats when they were told a shime for pinion was missing,,,we will see
Last edited:
ARRESTmeRed04
Active Member
what kinda RPMs will it run down the high way with the 4.88's??
Speedo is not effected by the gears. Make sure you break those gears in properly. Its very important...............follow the instructions. I had very specific ones from Unitrax.
After its broken it...........get ready for major traction issues!!! LOL Burning rubber has never been easier. First gear, full throttle is like driving on ice, second gear, full throttle rolling punch results in major tire spin..............third gear, you finally get traction!!! Yeeeehaaaa!!! LOL
patrick
After its broken it...........get ready for major traction issues!!! LOL Burning rubber has never been easier. First gear, full throttle is like driving on ice, second gear, full throttle rolling punch results in major tire spin..............third gear, you finally get traction!!! Yeeeehaaaa!!! LOL
patrick
mauiSRT/10 said:
well i have an 05 that had 456 rear so im only bumping up to 488 ,,,now if you go from a 410 to 488 you will freak i think when you first start ,,,but i will post up a report as soon as i get truck out on the road after break in ,,,i might have to miss trip to the temple ,texas gtg on the 24th,,1/4 mile track run cause of break in time needed since i dont drive mine as a daily driver ,plus i will soon be switching to a set of 325 rubber,,but bygod i will be ready for macon run,or as im calling it like the ol movie MACON COUNTY LINE RUN,:rock: :rock: :rock: :rock: :rock: :rock:
Last edited:
Dom426
Full Access Member
hahahaha drinkin cervezas watchin the white guy build his fence i love itIronhead said:
you old fart ,,im selfish i want both ,,trust me after working on my fence all day and then hear they cant finish it pissed me off ,,,they said there was a shime for the pinion gear missing from kit so they had to order it ,,,grrrrrrrr
ARRESTmeRed04 said:
Here is a good reference post by Silverback that responds to your question.
http://www.vtcoa.com/forums/showthread.php?t=32
505'sFastestViper. said:
the only diff you dumbass mexican ,is he did pay his half today and, i had to give him a break his wife went into labor the same day and had a little girl ,,but thanks for your smartass worthless retort
Last edited:
Support Us
Become A Supporting Member Today!
