A.R.T Forged Motor

[Tooloe]

2005 Viper Motor

CompStar Forged Rods
JE Forged Flat Top Pistons
Light Head Work By Greg Good
Bumped Compression
Gen 4 valves
Custom Cam
Intake Light Port And Polish
Stock Manifolds Ported
Motor Is Completely Port Matched
Comes With SCT Hand Held with 93 octane and nitrous tune
Roe Throttlebody


This Motor works really good with Nitrous

On Spray it made 700+ RWHP and 786TQ - The tires spun on the dyno and then it blew threw the clutch

Heres what i'm looking for I've got $12,000 tied up into this motor

Starting out i'm looking for $9,000 plus your stock motor. I'm letting the truck go back I really hate to do it but i can no longer hold onto it... also i am willing to work out a deal with the viper hydrolics and clutch thats attached... the motor has less than 10,000 miles on it since the rebuild. please feel free to PM me about any questions i can post the build sheet with prices From American Racing technology


Here Some Pictures

Head Work

Inside the Intake

Intake runners

Custom painted intake

 

[FATJACK]

Sounds like a good deal for someone, sorry to hear about your truck.

 

[moparracing]

interesting.......

what kind of HP w/o the spray??:dontknow:

 

[JTS VENOM PERFORMANCE]

Killer deal for someone , but sorry about the sale buddy

 

[Tooloe]

interesting.......

what kind of HP w/o the spray??:dontknow:

it did 517on motor. in 95 degree weather. with no tune

and yes it sucks but i can always buy another one.:aetsch:

 

[Brat]

Wish I had the coin thats a killer deal,sorry to hear you have to give it back.

 

[linemup]

Sorry bud, good luck with the sale! And that's a sweet looking intake!!!

 

[Sigma-Wildcat]

Sorry to here that you are letting your truck go back. I'm sure you will get through this a get another one. Good luck

 

[LoveThisTruck]

Damn dude Really hate to see you having to do this.

 

[Psycho Mythic]

I hate to hear this, I love your truck, definately look up to it. Goo luck with the sale bro, I'll talk around for ya

 

[Jigsaw89]

Roughly 30-cents a mile depreciation with a trade? Heard only good things about a Greg Good motor.

 

[Coley 1334]

would be a perfect motor for my bee :rock: to bad i'm a broke ass right now :heeeelllllooooo:

 

[ZCx]

would be a perfect motor for my bee :rock: to bad i'm a broke ass right now :heeeelllllooooo:

as long as ya ain't on a mountain

 

[faslane505]

no offense Tooley...but that seems really high...i know it cost somewhere around 12k to build your motor. but your essentially asking for 13-14k for it now. 9k cash and a 4-5k stock long block. i hope you get it...i was just wondering if you though of it that way

 

[TNVIPER]

no offense Tooley...but that seems really high...i know it cost somewhere around 12k to build your motor. but your essentially asking for 13-14k for it now. 9k cash and a 4-5k stock long block. i hope you get it...i was just wondering if you though of it that way

Your math dont work...


T=Toole's motor
Y=Your motor


Y+9K=T
Y=T-9K

You will give Toole $9K + your motor........Toole gives you a motor that has been forged....You have a motor + forging + $9K.............simplified you get a forged motor for $9K.........not counting labor..

 

[Yellow venom]

Where was this deal last year! Good luck on your sale/swap:rock:

 

[Tooloe]

no offense Tooley...but that seems really high...i know it cost somewhere around 12k to build your motor. but your essentially asking for 13-14k for it now. 9k cash and a 4-5k stock long block. i hope you get it...i was just wondering if you though of it that way

The way i figure it is that i spent 12k building my motor. That still has a warrenty.
With this motor you get already custom tunes. which is around a grand with a good tuner spending a few hours on the dyno with the truck.
i honestly do not think it's a bad deal your motor plus 9 grand. it's pretty much just swaping motors. thats the hard part to swallow.. i'm not even counting the money i've spent on having the valve/intake custom painted this includes the nitrous system on the truck....sounds like a pretty bad ass deal to me
Edit- 9,000 is what i have in parts alone for the motor

 

[LoveThisTruck]

You need to keep this thing together man. Sell yourself on the streets if you have to:dontknow:

 

[viperhauler]

why not just sell the motor and use the cash to float for a while...??

maybe find a beat up motor from x2 or something?

 

[Diamond head]

The way i figure it is that i spent 12k building my motor. That still has a warrenty.
With this motor you get already custom tunes. which is around a grand with a good tuner spending a few hours on the dyno with the truck.
i honestly do not think it's a bad deal your motor plus 9 grand. it's pretty much just swaping motors. thats the hard part to swallow.. i'm not even counting the money i've spent on having the valve/intake custom painted this includes the nitrous system on the truck....sounds like a pretty bad ass deal to me
Edit- 9,000 is what i have in parts alone for the motor

How many miles is on the engine total? Whats left on the warranty? Do you have any pictures of the completed engine?