AEM GAuge

[SRT-10 RAM VIPER]

guys i'm having difficulties adding the air fuel wideband gauge uego. i wanna know when installing it will it throw a check engine light? im curious about that. also where should i add sensor. and wiring??? thanks in advance

 

[ICPREY]

No code will be set. It's an independent gauge and has no interaction with the PCM. You just have to find a good 12v ignition source and a ground. Do you have after market headers? If so they may already have a bung welded in for an additional sensor.

 

[SRT-10 RAM VIPER]

No headers at the moment. Still running stock manifolds

 

[ICPREY]

I've never messed with the stock manifolds on the SRT 10. But you'll have to have a shop weld a bung precat close as possible to the head,but where all the primary's merge.

 

[LitemUp]

Your going to need a shop to weld a bung on the driver side midpipe before the 1 cat.

 

[Slitherbeast]

the bung should be in the box with thw gauge. Get a muffler shop to install it. Have the gauge mounted and the wiring done and ready! Then you will know where you can install the bung . you have some wire length limitations don't let the wires touch the exhaust! you will have less problems.