Sorry couldnt find the old pics I took so snapped these right quick.
used a hurst promatic 2 truck shifter
but basically unhook the stock cable from the tranny and the shifter under the dash.
Then you will have to position the floor shifter where you want it , mount the shifter on the floor by cuttin the carpet and pickeing your spot.
Next drill a whole in the floor to run the cable.
route it away from the exhaust.
They supplied different brakets with the shifter, I used the one for the 727 If not mistaken.
but get everything adjsuted correctly for gear position, this is what is time comsuming, but it can be done eventually and yes the dash prndl still works.
Hope these help stevo
used a hurst promatic 2 truck shifter
but basically unhook the stock cable from the tranny and the shifter under the dash.
Then you will have to position the floor shifter where you want it , mount the shifter on the floor by cuttin the carpet and pickeing your spot.
Next drill a whole in the floor to run the cable.
route it away from the exhaust.
They supplied different brakets with the shifter, I used the one for the 727 If not mistaken.
but get everything adjsuted correctly for gear position, this is what is time comsuming, but it can be done eventually and yes the dash prndl still works.
Hope these help stevo
