Almost ready for nitrous, any last minute mods?

[LoveThisTruck]

Talk to Justin at JMB Performance, he has a cutom kit for our trucks that is very complete that looks and works great!!

You got that right http://jmbperformance.com/store/product_info.php?cPath=66_113_101&products_id=304:rock:

Like FATJACK and 1qksrt said, you "should" be alright for a long time. Just make sure you get a good tune.

 

[precisiondyeing]

Ok, how about this scenario? Using a NOX system somehow to accelerate the cooling process of the intake? Maybe use something as low as a 50 shot? I really know nothing about doing this so I hope someone has some answers. Thanks!

 

[ViperPunk]

sounds good just get a good tune

 

[kickinassrt-10]

If you do it properly the nitrous is fairly safe.

What kit are you running? My friend just took a nitrous express kit off his srt8 after a year of use and it was safe. I was told anything under 150 on a WET shot is safe for our stock engines. I was thinking of buying his then getting in contact with Justin to see what I need for it to work on this truck.

 

[precisiondyeing]

The one i was considering is the one Justin has at JMB performance. Would it be a good choice for just a small 50 shot to quickly cool the intake?

http://jmbperformance.com/store/product_info.php?cPath=66_113_101&products_id=304

 

[FATJACK]

Talk to Justin, he is really educated on the nitrous.

 

[FerrariTruck]

i would talk to mike brady, he ran a 300 shot and went 10.7

 

[faslane505]

The budget for my next mod is $5k.

you could do a nasty set of HEad/Cam combo for that...be around 540/600 rear wheel...safely...take the correct precautions when spraying...ive made that mistake

 

[precisiondyeing]

What is Mike Brady's username?

 

[Dom426]

What is Mike Brady's username?

onebignastycack

 

[Dom426]

justin is the one that built my truck he is very sharp with n2o oh and i think he has the fastest n20 only truck on the forum...and i believe it is also bone stock...justin is definately th guy you wanna talk with

 

[precisiondyeing]

Where would you suggest I look for a really nasty head/cam combo?

you could do a nasty set of HEad/Cam combo for that...be around 540/600 rear wheel...safely...take the correct precautions when spraying...ive made that mistake

 

[ViperPunk]

bump...

 

[precisiondyeing]

WTF is bump?

BTW I'm going with a 125 wet shot from Justin.

bump...

 

[JTS VENOM PERFORMANCE]

best head cam set up is striker heads, and a custom cam , they usually run around $700 or so maybe less since I got the engine guy, whom has tons of connections

 

[kickinassrt-10]

WTF is bump?

BTW I'm going with a 125 wet shot from Justin.

Bump is to get your post bumped up and try to get a response......
I'm thinking of doing the same Nitrous Express 125 Wet shot from my buddy...trying to get part #'s to justiin to see what I need...His kit was off SRT8

 

[ViperPunk]

best head cam set up is striker heads, and a custom cam , they usually run around $700 or so maybe less since I got the engine guy, whom has tons of connections

is that 700 hundred for the cam or are you getting one hell of a deal:dontknow:

 

[fastblksrt]

I've been running a 150 shot for awhile now haven't had any issues. (KNOCK ON WOOD) Use a window switch to control the spray & swap to colder plugs and you should be alright.:driver: