Am I missing a hose clamp?

[Tweak]

Im leaking antifreeze from this hose

 

[GADodgetech]

Check to see if its clogged or kinked, there is no clamp that goes there.

 

[ZCx]

Check to see if its clogged or kinked, there is no clamp that goes there.

then make sure its pushed on all the way & a small nylon tie & you'll be good the go
:rock: :rock: :rock:

 

[GADodgetech]

then make sure its pushed on all the way & a small nylon tie & you'll be good the go
:rock: :rock: :rock:

Also make sure it isnt cracked at the end, it should be a tight fit on the nipple

 

[Tweak]

I checked it's not clogged, Im going to put a hose clamp on it till I can get a new line. This one seems loose, or just wore out.

 

[wesalbert]

So was I. I cut a bit off at the end (in case there was a crack) pushed it back on and put a small clamp around it.

 

[Yellow venom]

So was I. I cut a bit off at the end (in case there was a crack) pushed it back on and put a small clamp around it.

I did the same thing:rock: ,mine had the drip,LOL!

 

[Black1]

If you are using hose clamps, make sure not to tighten them too much.... it's just plastic and WILL crack under too much pressure.

 

[TNVIPER]

Ditto on the cut and clamp...have done that twice in the past 2 yrs to stop leaking..

 

[SHU-DOG]

Lil zip tie.