Another Comp Cam for sale!!

VENOMOUS1 RACING

Has Left the Room - Banned from VTCOA!
Joined
May 15, 2009
Messages
12,751
Reaction score
2
Location
Wacko Waco,TX
New in BOX!!!! Comp Cams 111-320-10 Extreme Street Performance camshaft. This cam was used in MMMmmTorque's build if you do a search:D
Performed great!
New $560.............................
For Sale $ 450:D

Has cam card and new in box!
 
Comp Cams 111-320-10 camshaft New IN BOX!!

Intake Exhaust
RPM Range: Valve Lash:
Valve Timing: Duration:
Lobe Separation: Duration @ .050" Lift:
Intake Centerline: Valve Lift:
Lobe Lift:
Valve Timing @ .006 Lift:
Exhaust
Closes 24
ATDC
Opens 72
BBDC
114 Intake
21 Opens
BTDC
68 Closes
ABDC


Recommended Components
Component Part Number
Rocker Arms 1105-20 [1]
Push Rods 7693-20
Valve Springs 924-20 [2]
Camshaft Break-In Lube 159

Installation Notes (These notes apply to the above recommended components with the trailing installation note numbers)
Note Description
1 [1] Requires screw-in studs & guide plates.
2 [2] Requires machining on cylinder heads.
7 [7] Stock springs cannot be used.

Contact us via email

Return to Store Item
 
Last edited:
Intake Exhaust
RPM Range: Valve Lash:
Valve Timing: Duration:
Lobe Separation: Duration @ .050" Lift:
Intake Centerline: Valve Lift:
Lobe Lift:
Valve Timing @ .006 Lift:
Exhaust
Closes 24
ATDC
Opens 72
BBDC
114 Intake
21 Opens
BTDC
68 Closes
ABDC


Recommended Components
Component Part Number
Rocker Arms 1105-20 [1]
Push Rods 7693-20
Valve Springs 924-20 [2]
Camshaft Break-In Lube 159

Installation Notes (These notes apply to the above recommended components with the trailing installation note numbers)
Note Description
1 [1] Requires screw-in studs & guide plates.
2 [2] Requires machining on cylinder heads.
7 [7] Stock springs cannot be used.

Contact us via email

Return to Store Item

Missing quite a bit of info, what is the duration and lift for both the intake and exhaust?
 
Whoops it didn't copy and paste! LMAO!

Here goes!

Intake: Exhaust: RPM Range:1200-6200 Valve Lash: .030 .030
Valve Timing: .006 Duration: 269 276
Lobe Separation: 114 Duration @ .050" Lift: 218 224
Intake Centerline:114 Valve Lift: .528 .536
Lobe Lift: .330 .335
Valve Timing @ .006 Lift:
:D


IN old school Cam Terms it's a 218/224 with .528/.536 on a 114* ;)
 
Whoops it didn't copy and paste! LMAO!

Here goes!

Intake: Exhaust: RPM Range:1200-6200 Valve Lash: .030 .030
Valve Timing: .006 Duration: 269 276
Lobe Separation: 114 Duration @ .050" Lift: 218 224
Intake Centerline:114 Valve Lift: .528 .536
Lobe Lift: .330 .335
Valve Timing @ .006 Lift:
:D


IN old school Cam Terms it's a 218/224 with .528/.536 on a 114* ;)

I did some research and I think the lift quoted by Comp Cams at .528/.536 was figured with 1.6 rockers and since ours are 1.7 then the effective lift is .561/.570, hope this helps.
 
I did some research and I think the lift quoted by Comp Cams at .528/.536 was figured with 1.6 rockers and since ours are 1.7 then the effective lift is .561/.570, hope this helps.

Are you sure?
 
for the price of a custom cam, anyone could get this cam and get the springs required for free! good cam. Might be old technology but HP and TQ numbers wouldn't be much difference. This is a good price for a good cam! Somebody should jump on this!
 

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Back
Top