any houston members with a VIPER CAR?

[LETHAL HEMI]

:rock:I have a friend with a 2006 LS2 Vette with a cam, FBO, tune that wants to see how he will do against a stock vette from a roll if anyone is down let me know

 

[LETHAL HEMI]

never mind i found one..

 

[ARRESTmeRed04]

How you coming on your truck man

 

[LETHAL HEMI]

How you coming on your truck man

Everything is installed but then decided to change the cam and make it more aggressive. I finally installed the new cam yesterday and put everything back together today. The only headache now is when OSO noticed my dip stick wasnt in place and now i have to lift the driver side of the block up to put the dip stick in. Once thats done i can start her up and keep her on for a few second and make sure everything sounds right. Then wrapping everything up by putting the radiator and start the tunning process:rock:

How the truck do with the new track set up

 

[ARRESTmeRed04]

How the truck do with the new track set up

ummm well....the little rims and tires didn't fold up going down the track so that was a plus, and it felt pretty solid. but my clutch hydraulics/pressure plate or something else??:dontknowhavent pulled it apart yet) are pretty much fried, its starting to get harder to shift even driving normal so its retired at the moment. hoping i havent hurt the sycros in the trans already:toilet:

 

[LETHAL HEMI]

ummm well....the little rims and tires didn't fold up going down the track so that was a plus, and it felt pretty solid. but my clutch hydraulics/pressure plate or something else??:dontknowhavent pulled it apart yet) are pretty much fried, its starting to get harder to shift even driving normal so its retired at the moment. hoping i havent hurt the sycros in the trans already:toilet:

Damn that sucks cause i know anything that has to do with SRT isnt cheap..Good luck and ill post a video as soon as i start it

 

[ARRESTmeRed04]

Yeah one of these days ill fix the damn thing, waiting to see the new billet clutch master/slave look like, and I want to pick up a lightweight flywheel. Getting the itch to cut the factory leaf springs and mounts out and fabbing up some ladder bars and coil overs.