Any performance upgrades for the ignition...

[jrgnd]

system? Like coil/cable upgrades?

 

[Texas Yellow Fever]

MSD makes 8.5mm plug wires, that's all the ignition upgrades that I am aware of.

 

[BlackViperRam04]

I remember reading somewhere that the 8.5mm wires are are pain because they don't fit in the stock wire clips. (Duh, THEY ARE BIGGER) However, does anyone know of another way of routing them so they still look clean?

 

[Blakewilder]

I have the MSD Wires on mine.....but I havent heard of any MSD Ignition Hot Box or anything like that....Man JR you should just get one of my pulley setups and take her up to about 10 lbs of boost and youll make BIG power. Or do the heads and cam.....or both Im makin 12 lbs of boost right now and Im thinkin about doing a cogged pulley setup and takin it up to 15lbs.....

 

[JTS VENOM PERFORMANCE]

I just wish you would answer the phone Blake!!!

Looking , I seen coils by someone , just got to find them again:dontknow:

black ram, you can route them under the intake and bring them out o f the runners it looks a tad cleaner

 

[BlackViperRam04]

OOOO...I didn't think about that. Thanks:rock:

 

[jrgnd]

I have the MSD Wires on mine.....but I havent heard of any MSD Ignition Hot Box or anything like that....Man JR you should just get one of my pulley setups and take her up to about 10 lbs of boost and youll make BIG power. Or do the heads and cam.....or both Im makin 12 lbs of boost right now and Im thinkin about doing a cogged pulley setup and takin it up to 15lbs.....

Sure...I will do that on a stock motor...Mike blew his with a 250 shot...I will blow mine with boost... ...I am just trying to get a better ignition system going...

 

[Blakewilder]

Mike ran 10lbs of boost for a year with no problems. He blew it with 10 lbs of boost AND a 300 shot. A larger idler pulley would help also but either way.....good luck.

 

[jrgnd]

Mike ran 10lbs of boost for a year with no problems. He blew it with 10 lbs of boost AND a 300 shot. A larger idler pulley would help also but either way.....good luck.

I didn't know that....I will look into it...

 

[jrgnd]

The only MSD wires that I was able to find were for the 1992-2002 Viper. Will this work on our trucks?

http://store.summitracing.com/partdetail.asp?autofilter=1&part=MSD-32259&view=32&N=700+0

 

[JTS VENOM PERFORMANCE]

jrgnd Justin of jmb one of our vendors has them for $92 about as cheap as you'll find bro:rock:

 

[Stanimal]

the motors are the same setup so i would imagine so,,,, but not positive

 

[jrgnd]

jrgnd Justin of jmb one of our vendors has them for $92 about as cheap as you'll find bro:rock:

Thanks bud..will get them from him..

 

[JTS VENOM PERFORMANCE]

While youre at it , tell him to send ya some of those nice radiator hose kits in red!~!
look sweet on your ride!!:rock:

 

[jrgnd]

While youre at it , tell him to send ya some of those nice radiator hose kits in red!~!
look sweet on your ride!!:rock:

Will do bud...

 

[Prof]

Roe Racing sells the MSD ignition wires...or you can get them free with a Top Mount Twin Screw supercharger!

[/IMG]

 

[DJCHEROKEE]

Roe Racing sells the MSD ignition wires...or you can get them free with a Top Mount Twin Screw superchargerQUOTE]

CAN I JUST BUY THE MSD WIRES AND GET A FREE Top Mount Twin Screw supercharger I THINK THAT WILL BE NICE

 

[jrgnd]

Roe Racing sells the MSD ignition wires...or you can get them free with a Top Mount Twin Screw supercharger!

[/IMG]

Thanks...

 

[Prof]

Roe Racing sells the MSD ignition wires...or you can get them free with a Top Mount Twin Screw superchargerQUOTE]

CAN I JUST BUY THE MSD WIRES AND GET A FREE Top Mount Twin Screw supercharger I THINK THAT WILL BE NICE

Sean is a good guy...but he may baulk at that deal...but ask him!

By the way, when you have a twin screw top mount...the supercharger has to come off to replace the ignition wires...Sean can do it in about 20 minutes...I think it would be an all day task for me...with the MSD's you should never have to do that.