Attn: N2o Gurus

[Tooloe]

Justin this is mostly for you..... but others chime in please
After i get my motor redone.. an get it running right...i'm going to be putting my nitrous kit on the truck but i'm having 2nd thought on what an how i should build it.... i would like to do 2 nozzles under neath the Intake right after the throttle body....i would also like to run a 2nd stage in the intake tube.....so if i get this right should the 1st stage be the one in the tube or the ones in the intake?..... i'm planing on running around a 200 shot anywhere from a 150 to 225 at the most .... im just looking in to setting it up the correct way......so is this safe or not safe...and how would you do it?

thanks for the help also the bigger shot will be on a progressive controler

 

[pissant#420]

1st stage in the intake tube (50-75 shot ) 2nd stage in the intake(100-150 shot) not much room underneath imo also jet changes would be a hassle on bottom 2nd stage should have dedicated fuel system

 

[Tooloe]

the stage in the intake would not be changed i was thinking like a 125 for the first shot and what ever else in the 2nd

 

[moparracing]

what nitrous kit do you plan to run? alot of the guys here seem to run a dual nozzle, single stage, 150 wet shot on stock internals...... i've also heard the the progressive controllers are hard on the nitrous solenoids........:dontknow:

 

[Tooloe]

what nitrous kit do you plan to run? alot of the guys here seem to run a dual nozzle, single stage, 150 wet shot on stock internals...... i've also heard the the progressive controllers are hard on the nitrous solenoids........:dontknow:

nitrousoutlet is less than 20 min from my house i plan on running all there stuff.. i've always built my own kits....but it will be with most of all their hardware ....yes the progressive controlers are hard on the solenoids..the small shot will no be on one

 

[HISS]

I think a fogger down the center of the intake would be kick ass! Just put a progressive contoller on it and be done with it.

 

[OnceBitten]

Anyone using the Nitrousoutlet 03-06 viper kit with the plate?

 

[Tooloe]

Anyone using the Nitrousoutlet 03-06 viper kit with the plate?

i was going to run the plate..... but i do not like fact that it says nitrous outleton the top of it.. i'm more of a sneeky nitrous guy.. i don't like everyone knowing i'm spraying... but if i didn't care i would buy it in a heart beat..it's bad ass

 

[OnceBitten]

According do the website they alos do "custom" plates. I wonder if they would sell one without the logo?

 

[Ironhead]

what is part number for plate

 

[Tooloe]

i dunno but i can find out i'm pretty sure you can get dave to make one without the engraving on the plate...