B&B install pictures

[Sharpimage]

Hey, i thought about making a DIY on this but i waited too long to type one
up and forgot the nit picky stuff.. so i bring you pictures instead :rock:

friendly reminder of where our trucks came from

EDIT: TREKER - if you read this... pretend you didn't see my undercarrage.. just the pipes

Sharpi

 

[moparracing]

you should have jet-hot coated them while they were out....... those headers run hot !!!!!

nice pics..........

 

[SANCHOBA]

looks good! any trouble with the manifold bolts,(extraction) how about where they connected to the mids? i'll be removing mine soon

 

[cip5150]

VERY NICE!

 

[Roz]

I'll speak for TREKER. . .

WASH YO SHIT!!!!

Nice pics there Sharpi. . . Any sound-clips??

 

[HaulinAsp]

you should have jet-hot coated them while they were out....... those headers run hot !!!!!

nice pics..........

:dito: :dito: :dito:

 

[Sharpimage]

Thanks for the replies thus far! really worked my ass off to install them!

looks good! any trouble with the manifold bolts,(extraction) how about where they connected to the mids? i'll be removing mine soon

The stock headers were not a problem to get off... i used an impact wrench
and it took less than 30 seconds to unbolt and remove the stock headers...
if your running stock mids i would highly suggest you remove those first before you unbolt the stock headers.
i had x-metal mid pipes so it was a little easerto remove than stock mid pipes..
Also, when you go to remove the headers
dont try to remove them by pulling them up and out of the engine bay.. just slip
them down and back.... much easier :rock: AND... big and there.. on my passenger
side headers i had to use a crowbar because they didnt have the bolt holes
matched up perfectly.. took one full day to do the passenger side.. driver side
took three hours and finally.. read the directions! i thought i could pull the
"You don't need instructions" routine... Wrong! save some time and read the directions

let me know if you got any other questions

I'll speak for TREKER. . .

WASH YO SHIT!!!!

Nice pics there Sharpi. . . Any sound-clips??

yeah i'll actually have some sound clips when i go to my boys house to get
the exhuast welded up.. right now it sounds like a funny car with no muffler
and just mid pipes

Sharpi

 

[Roz]

yeah i'll actually have some sound clips when i go to my boys house to get
the exhuast welded up.. right now it sounds like a funny car with no muffler
and just mid pipes

Sharpi

Get sound clips of that too!!!

 

[RUFROZN]

sweet!

 

[pissant#420]

those look great:rock:

 

[Marc T]

They look great!!

Know fix the oil cooler line leak!!