B&M Ripper in w/pics

[IndianaSRT10]

Well, after a couple of days of being sick, I finally was able to get the B&M shifter in. I wasn't expecting it to look like that but it's mean looking, especially with the black handle. As far as the noise, yeah, there's some harmonics but with the radio turned on, you can't hear it. It's definately better feeling than the stock shifter and there's not as much vibration as I thought there would be. The instructions I had are still for the 04s and 05s so I had to ask some questions on here and experiment a little but if I had to do it again, it would take an hour or so. It's definately worth it. Here are the pics:

See post 7--the pics that were here...welll uhmmm...you don't want to see those. *LOL*

 

[SilvrSRT10]

I think if you install the upper stick (turned 180 degrees) to the left side of the lower stick the shifter will be more upright. Not much different from the original position. But if you like it the way it is......go for it.

You need to change your sig now.

 

[tidnab]

yeah, something doesn't look right... but if you like it and as already stated... time to change ur sig

 

[Hamrhead]

You use the radio??:dontknow:

Haven't had mine on in months as the Full Exhaust sounds tooooooo good!



Shifter looks pretty cool like that!:rock:

 

[IndianaSRT10]

I think if you install the upper stick (turned 180 degrees) to the left side of the lower stick the shifter will be more upright. Not much different from the original position. But if you like it the way it is......go for it.

You need to change your sig now.

Oops. You're right. I'll see how I like it like this and turn it around if I don't. :dontknow:

 

[RedSrt007]

hehe...cool deal man

Yeah, like they said, you installed it the wrong way lol....But if you like it, go with it!!

 

[IndianaSRT10]

Here--this is better! I'll blame the above pics on being sick! :idea:

 

[Django]

Man, that is short.................I like it.

SD

 

[RedSrt007]

Here--this is better! I'll blame the above pics on being sick!:idea:

lol man, were just giving ya a hard time

:burnout::burnout:

 

[SilvrSRT10]

Do what feels good. If you liked it then that's all that matters.
I think it looks better pointing straight up but nobody asked.
Glad your better.

 

[IndianaSRT10]

Man, that is short.................I like it.

SD

Thanks. I still have room to mess with so if the console starts to bug me, it only takes me about 10 minutes to get to the bolts and raise the top of the shifter up.

 

[QuickSilver]

:rock: Nice job! :star: ya done good....

Quick

 

[Hamrhead]

Here--this is better! I'll blame the above pics on being sick! :idea:

That looks right-er!:rock:

Now get a T-Handle so you can rip it outta the floor!!:joyman: :driver:

 

[FATJACK]

Looks Fine, how does it shift?