Bedding Procedure for brakes

[HOT RAM]

Just got my Performance Friction brake pads on all four wheels this evening.Is there a specific bedding/break-in procedure for these pads ?

 

[SANCHOBA]

YES! i'm trying to think... got to heat them up,start from 30mph,brake as hard as you can, then do the same at 40 and then 60,don't let them kool down. and remember to scuff the rotors up with a 3m pad before you start the process.

 

[JRSVIPR]

Just got my Performance Friction brake pads on all four wheels this evening.Is there a specific bedding/break-in procedure for these pads ?

You can go to www.zeckhausenracing.com And They will have the process.

 

[supercar1of1]

http://www.zeckhausen.com/bedding_in_brakes.htm

 

[moparracing]

http://www.zeckhausen.com/bedding_in_brakes.htm

it works, even cured brake shutter on my wifes jeep......:rock:

 

[TNVIPER]

The zeckhausen bedding has worked for me on 3 different vehicles...zero squeeking after bedding...well I did have to do the SRT8 twice but after the 2nd time it never squeeked for 10K miles........accelerate to 60mph.....brake hard to 10 mph....back to 60...then brake hard to 10....do this 8 times....make sure you can drive 10 miles after the 8th braking without touching the brakes...

 

[HOT RAM]

Thanks !!

 

[VIPER HP]

The bedding process works great. I've never had brakes work this good.
They have been perfect for 8,000 miles.