Belltech suspension stuff?

[65fastback2+2]

Does the Belltech suspension stuff say for a 2005 Quad Cab hemi work on ya'lls SRT10's or not?

Im not all too familiar with the SRT10 suspension.

 

[ViperJeff]

Unless it specifically says SRT-10, I would not trust it would work. The suspension on an srt-10 is different than a off the rack 1500

 

[seethrough]

I had the rear bell tech lowering springs on my truck before switching to a ladder bar setup. I started to lower the truck by removing the overload spring and didn't get the results that I wanted so I ordered Belltech springs and hanger. They have a part number on them so I can check tomorrow to see what they are advertised as fitting. I never had a problem with them but also never towed or raced with them.

 

[65fastback2+2]

I had the rear bell tech lowering springs on my truck before switching to a ladder bar setup. I started to lower the truck by removing the overload spring and didn't get the results that I wanted so I ordered Belltech springs and hanger. They have a part number on them so I can check tomorrow to see what they are advertised as fitting. I never had a problem with them but also never towed or raced with them.

ya. I saw a couple threads on here with people using some of their stuff for regular ram 1500's, thats why I asked to try and find out what specifically works and doesnt work.

 

[crazynaclh20]

If you really krafty with a plasma cutter and a welder you could fab up some brackets and use the splined solid tortion bar with arms setup like the nascars use. I did this with a 1932 dodge and went a bit overboard and went to a 1 1/4" on the rear, this is equal to a 2" bent bar. The car might be a bit too stiff but I had to combat the roll from the air bags.
These bars mount to the frame and the arms need to be linked to the axle just like the formed ones but take up much more room. I got 2 bars and 4 arms from ebay for 325

 

[rare03srt10]

The belltech front coils for normal ram will work but they wont lower your srt 10 anymore then it already is. Itll be much better ride then the stock srt10 springs but no difference in ride height. The belltech rear flip kit for the quad cabs works on the SRT10 also.

 

[TheSuspensionSource]

Some say it does but Belltech does not endorse that it does.