BIG Project UPDATE Thread......

[EMT/SRT]

Let's hear and see some progress........

FSTJACK(both SRT-10s)

DOM(you're pretty good about updating yours:rock: )

TinyGiant's truck

Scrambler

Stinker(you're no exception)

Eddie(you either)

RamfromHell

 

[VIPER]

Let's hear and see some progress........

FSTJACK(both SRT-10s)

DOM(you're pretty good about updating yours:rock: )

TinyGiant's truck

Scrambler

Stinker(you're no exception)

Eddie(you either)

RamfromHell

good idea for the thread :rock: :rock: :rock: :rock:



:burnout: :burnout: :burnout: :burnout: :burnout: :burnout: :burnout:

 

[EMT/SRT]

Thanks! And I apologize if I have omitted anyone who is undertaking a big project on their SRT-10. It wasn't intentional. I have the beginning stages of CRS.

 

[BurntRubber]

i heard they are having a dyno day

dom is going to do 27 pulls
eric cant get his tuner there
jack is still building


i am rolling up with my 99 saturn, so i will probably put down the best numbers

 

[EMT/SRT]

i heard they are having a dyno day

dom is going to do 27 pulls
eric cant get his tuner there
jack is still building


i am rolling up with my 99 saturn, so i will probably put down the best numbers

:rock: :rock: :rock: :rock: :rock: :rock: :rock:

Shame works! Hopefully it's enough shame to make them post some pics! :congrats:

 

[JTS VENOM PERFORMANCE]

i will post pics later tonight of my brutal baby:rock:

 

[Dom426]

http://www.vtcoa.com/forums/showthread.php?t=35588&page=4

 

[EMT/SRT]

Found another!......

05dodgesrt10 let's hear about it!


UNDER CONSTRUCTION Full Copperhead Paint Job/522 Stroker In The Works!,Roe S/C and Meth Kit, Bellanger Headers w/ Midpipes, Magnaflow Cat Back, 172* Thermostat, MSD Wires, SCT Tuner

 

[cyalata]

still in the works motor still needs built lol falling short on the cash flow


QUOTE=EMT/SRT]Found another!......

05dodgesrt10 let's hear about it!


UNDER CONSTRUCTION Full Copperhead Paint Job/522 Stroker In The Works!,Roe S/C and Meth Kit, Bellanger Headers w/ Midpipes, Magnaflow Cat Back, 172* Thermostat, MSD Wires, SCT Tuner[/QUOTE]

 

[Scrambler1]

You'll just have to wait and find out!!

 

[kyle's srt10]

Here's my new project....:rock: :rock:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=130321420102&ssPageName=STRK:MEWAX:IT

It's been over 2 years since I fixed one
Here's the thread on the last one.
http://www.vtcoa.com/forums/showthread.php?t=7701

 

[cyalata]

Here's my new project....:rock: :rock:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=130321420102&ssPageName=STRK:MEWAX:IT

It's been over 2 years since I fixed one
Here's the thread on the last one.
http://www.vtcoa.com/forums/showthread.php?t=7701

congrats i had to sell mine to fund paint

 

[VIPER]

i will post pics later tonight of my brutal baby:rock:

i dont beleave i have ever seen ur truck :rock: :rock: :rock: :rock: :rock:

 

[eddie102870]

mines on jack stands, lowering kit is in, DTS rear end is in, motor and tranny are fixin to come out. motor is being assembled right now. front bumper cover is being modified. still in a state of dissarray right now. does have a fresh coat of dust on it.

 

[JTS VENOM PERFORMANCE]

Eddies motor update;

crank is done and being nitrided......

block has been cleaned the honing is done for the billet mains...

next is fitting the bearings, and boring of block, decking block and fitting pistons.
(interesting note is the bearings are being fitted,a custom set of bearings, the block is being measured and the crank also for a perfect fitting bearing)

along with that is cloyes timing chain, custom comp cam for paxton, new lifters, heads w/new springs, and all new valves, no porting.

new oil pump, lifters water pump, front cover, ati dampner.

all work being done by Jeff Collins engine works

 

[VIPER]

Eddies motor update;

crank is done and being nitrided......

block has been cleaned the honing is done for the billet mains...

next is fitting the bearings, and boring of block, decking block and fitting pistons.

along with that is cloyes timing chain, custom comp cam for paxton, new lifters, heads w/new springs, and all new valves, no porting.

new oil pump, lifters water pump, front cover, ati dampner.

and ur truck ??

 

[JTS VENOM PERFORMANCE]

I'll go get the camera

 

[VIPER]

I'll go get the camera

go go go go go go :burnout: :burnout: :burnout: :burnout: :burnout:

 

[JTS VENOM PERFORMANCE]

before

culprit

after

result

 

[VIPER]

before

where can i get a setup like that ?? dammm that fookin SWEEEEETTTTT