Body Mount Bushings

[JeffBoyette]

Has anyone been under the truck and noticed how off centered the oem soft rubber body mount bushing are? They were worse on my 05 but these are doing it too. Thinking about replacing them energy suspension.

 

[johnnybravo]

I had JTSVP's full bushing kit on my truck and it completely changed the handling. I thought it was tight before with just the drop kit, but the bushings took out what little body roll was left. Well worth the cost IMO.

 

[JeffBoyette]

I had JTSVP's full bushing kit on my truck and it completely changed the handling. I thought it was tight before with just the drop kit, but the bushings took out what little body roll was left. Well worth the cost IMO.

Its got caltracs, so i think the leaf springs bushings are already done. have to check.

I just did the sway bar bushing on the rear, the front sway bar was too big for my kit.

They dont offer control arm bushings for the 06.

Other than the steering rack bushings, what else does stinker sell?

I sent energy suspension an email to get a list of all the parts they offer for this make and model. i suspect i will have to use alot of their universal stuff. I know i want to get some new shocks, but i also want tie rods too.

 

[johnnybravo]

I think he sells all the ones you mentioned. End links, body mounts, steering rack, control arms, and leaf springs. If I'm not mistaken, the bushings he sells are Energy Suspension brand. I didn't realize the control arm bushings changed from 05 to 06.

 

[JeffBoyette]

The control arm, and the front swaybar. Not sure what else.

 

[JTS VENOM PERFORMANCE]

only thing not for the 06 is the lower control arm bushings, they are different then the 04-05, the sway bar is also larger

 

[ZCx]

thanks for remindin me:rock::rock:

just noticed the cab mouldins are bout 1/4" lower than the bed mouldins