nycstev
Full Access Member
Whatever happened to this? Someone was developing this last fall?
CAI for ROE
- Thread starter nycstev
- Start date
I believe justin was working on one:dontknow:
GILMO'S10
Full Access Member
George (black viper) made a real nice looking one for his roe.I believe he got most the parts from justin.Pm him for details and pics
DRamSrt10
Full Access Member
I remember someone posted a thread of the custom roe cai. I did try do the search but I couldn't find it.
I hope this helps.
SRT-MIKE
Full Access Member
I took mine off my Roe when I sold it and the buyer didn't want it.
I could be talked into packing and mailing it for a small offering...
I could be talked into packing and mailing it for a small offering...
SRT-MIKE
Full Access Member
Hey blackviper that looks killer!!!
Thanks!
SRT-MIKE said:I took mine off my Roe when I sold it and the buyer didn't want it.
I could be talked into packing and mailing it for a small offering...
PM SENT...
DRamSrt10
Full Access Member
Blackviper, that is what I was looking for. That is really looking an awesome! How did you do it? I want that CAI when I get the roe sc in the future.
nycstev
Full Access Member
Hey i started this post!
Justin's boot from his CAI and (2) 45 degree pieces from Spectre. Lastly, one piece of 5" stainless steel from Burns. You'll need to two 4" silicone hose connectors and one 5" to 4" silicone hose connector. Here are the links.
ELBOWS
http://www.spectreperformance.com/#CATALOG
STAINLESS
http://www.burnsstainless.com/
HOSES & CLAMPS
http://www.sfxperformance.com/catalog/Air~Intake~Systems/Silicone~Hose~Couplings/page_1.htm
ELBOWS
http://www.spectreperformance.com/#CATALOG
STAINLESS
http://www.burnsstainless.com/
HOSES & CLAMPS
http://www.sfxperformance.com/catalog/Air~Intake~Systems/Silicone~Hose~Couplings/page_1.htm
blackviper said:
In your pic the elbows are obvious. Where are you using the 5"? Is it at the filter?
You have to get a piece of 5" stainless for the filter. What I did was put that piece in a vice and slowly applied pressure to create the same shape as the filter.
yellowfever#154
Full Access Member
Just talked to sfxperformance, you can get the 45 degree Spectre pieces and all the hoses and clamps needed from them. Still have to get the 5" piece elsewhere.
blackviper said:
TREKER
Full Access Member
blackviper said:I hope this helps.
Looks great bro... You running stock internals with that pulley? :dontknow:
10 LB pulley on stock internals.
yellowfever#154
Full Access Member
Just wanted to comment on the parts list in post 12 to save anyone who is planning on doing this some money. I bought about $160 worth of parts including shipping/brokerage/duty that are not necessary.
What is needed is Justins CAI kit less the formed steel pipe, 2 - 45 degree Spectre elbows, 1 - 4" rubber connector and thats it.
You dont need the 5" stainless pipe, 5 - 4 reducer, or the 2nd 4" rubber connector. If anyone wants to do this the way listed in post 12 let me know because I have some of the parts that I will never use and cannot return, so I have a great deal on them.
What is needed is Justins CAI kit less the formed steel pipe, 2 - 45 degree Spectre elbows, 1 - 4" rubber connector and thats it.
You dont need the 5" stainless pipe, 5 - 4 reducer, or the 2nd 4" rubber connector. If anyone wants to do this the way listed in post 12 let me know because I have some of the parts that I will never use and cannot return, so I have a great deal on them.
I like the look. Any HP gains or just style points like on a stock motor?
Do you have dyno numbers with and without?
Roy
Roy
Support Us
Become A Supporting Member Today!
