Need some help. I'll be getting a set of used Caltracs from one of the members here. Was wondering if anyone can scan a copy of the Quab Cab installation instructions and send it to me? Thanks as always.
Caltrac instructions for a Quad Cab
- Thread starter SANTEEN
- Start date
Don't have the instructions for the '10, but this link might for general install. I just happen to go searching for this info yesterday:
http://www.pbase.com/leros/caltracs_install
http://www.pbase.com/leros/caltracs_install
do a google search:dontknow:
- Joined
- Feb 26, 2008
- Messages
- 9,775
- Reaction score
- 7
Attachments
FATJACK
Full Access Member
Call Stinky, you gonna need the front leaf spring bushings if the set you are buying are used.
I'll take some out of a box aand scan them later, forya
sit in the drivers seat let someone adjust them down until they touch the spring, then a turn and a 1/4 to turn and a half and tighten down
JTS VENOM PERFORMANCE said:sit in the drivers seat let someone adjust them down until they touch the spring, then a turn and a 1/4 to turn and a half and tighten down
just a wonderin, would that be with a full load of full, 3/4, 1/2 or 1/4 tank??????:dontknow: :dontknow: :dontknow:
which would be best?????:dontknow: :dontknow: :dontknow:
JTS VENOM PERFORMANCE said:
:rock: :rock: :rock: :rock:
VERY VERY IMPORTANT: A REAL GOOD COATIN OF ANTI-SIEZE ON THE ROD END THREADS, THREADS IN THE BARS & MAKE SURE THE JAM NUTS HAVE SOME AS WELL
:rock: :rock: :rock: :rock: :rock: :burnout: :burnout: :burnout: :burnout:
HOLY SHIT, did Stinker just scan and post something?
Steve, real men don't need instructions, just start turning bolts dammit.
Steve, real men don't need instructions, just start turning bolts dammit.
:aetsch: :aetsch: :aetsch:labontecsi said:
FSTJACK
Full Access Member
JTS VENOM PERFORMANCE said:
What you mean "no stinkin instructions" gringo, boraccho, punto, cabrone...................
500hpvanillagorilla
Full Access Member
YES...I've been searching for these! Thanks Stink!
that will be $4 , please deposit into key board500hpvanillagorilla said:
if you actually read the instructions it clearly states DON'T LET THAT F*CKTARD SANQUEEN INSTALL MESANTEEN said:Need some help. I'll be getting a set of used Caltracs from one of the members here. Was wondering if anyone can scan a copy of the Quab Cab installation instructions and send it to me? Thanks as always.
ZCx said:
yep, I wanna know too????
I would say 1/2 tank that way you are covered both waysCruster said:
Support Us
Become A Supporting Member Today!
