Catch Can set up

[SD2005Dustin]

Can someone send me pics of their catch can setup?

I bought the JMB setup from Viper used. and I have all the plumbing, but not sure where all to hook up to? and where I want to mount it at?


Anyone that can snap 2 or 3 shots of the plumbing that would be a BIG:elefant: help.



I know one goes to the line that comes out of the bottom of the TB, but after that...

I'm sure I could figger it out, but just want a reference.

 

[BLWNSRT]

This is how mine is set up for now:

http://vtcoa.com/forums/showpost.php?p=931291&postcount=10

If i can remember When I was stock you plug off the hose under the intake. and you run the two hoses from each valve cover to the catch can.

 

[VIPER]

Call me in a bit and I'll expline

 

[SANCHOBA]

When I was stock you plug off the one under the intake I think and you run the two hoses from each valve cover to the catch can.

this is right,you put a cap over the nipple under the intake,so as not to send oily water mix into it.

 

[SD2005Dustin]

"When I was stock you plug off the one under the intake I think and you run the two hoses from each valve cover to the catch can."
Thanks Ramchargerguy,

Did anyone else do this(block off the same one)?

 

[SD2005Dustin]

this is right,you put a cap over the nipple under the intake,so as not to send oily water mix into it.

Cool, yea, makes sense. I haven't been able to think for the last few days.

I had an accounting exam this weekend so my head is still spinning...

 

[SD2005Dustin]

Call me in a bit and I'll expline

Cool. Send me your number again lol

 

[sim333]

"When I was stock you plug off the one under the intake I think and you run the two hoses from each valve cover to the catch can."
Thanks Ramchargerguy,

Did anyone else do this(block off the same one)?

Im little confused I thought it was to be T off from each valve cover than t to the catch can. Any more pics so I can see. I might need to rerun mine. Thanks

 

[nycstev]

I had mine bolted near the cowl so it was easy to drain. Then I took off the breather and ran a house to the back of the truck so there was NO smell in the cab

 

[BLWNSRT]

Im little confused I thought it was to be T off from each valve cover than t to the catch can. Any more pics so I can see. I might need to rerun mine. Thanks

When you have a stock intake manifold there is a plug on the bottom that the one stock hose/tube runs too ( can't remember what it looked like haven't been stock for a long time) When you buy the kit from Justin Jmb it comes with a plug to block it off. Then you uses the supplied hose and tee from one valve cover to the other and then to the catch can.

 

[Ironhead]

Im little confused I thought it was to be T off from each valve cover than t to the catch can. Any more pics so I can see. I might need to rerun mine. Thanks

i seen yours ,,,your fine

 

[sim333]

i seen yours ,,,your fine

Thank you