catch can

[v10 fat]

hi guys ordered cai and catch can of justin

put the pipe from under the tb to the catch can is this right ?


when i look at pics of yours you have a nipple on the pas side valve cover were the catch can pipe tees into i do not have this nipple ??????

sorry for been dumb but im a capenter , bit puzzled

thanks scott

 

[Marc T]

If you have an 04 it will be on the back end of the Valve cover!! They moved it to the front on the 05's.

 

[v10 fat]

yes its a 04 bud


still pas side ?

 

[JimTeTe]

There are 2 hoses under there. Make sure it's the one towards the back of the truck. But it is in front of the manifold. The front most line is going to throttle body.
Kevan did a greay DIY on cleaning up the long overflow hose from the radiator. I used it on mine and it really cleaned it up. It's in the DIY section. Somebody also posted a pic of the manifold bottom which really explained the question. Damn .... Can't find it though. Here's a couple pics of the hose cleanup, before and after.

Hope this helps a little ... Good Luck

Jim

 

[v10 fat]

thanks ill have look

 

[v10 fat]

If you have an 04 it will be on the back end of the Valve cover!! They moved it to the front on the 05's.

got it also in the kit they was a black bung wers that go ???

any pics installed on a o4 would be good

thanks

 

[JimTeTe]

Thats where it goes where I just explaind. My mistake I thought you were looking for what to plug. It sounds what Mark T is saying is the right location for your first question. Sorry for any confusion.
Just trying to help.
Jim