catch can ??

[VIPER]

what size lines do i need for the Catch Can ? elbows tee's ? ect...

what do i need to install this ?

thanks

 

[VIPER]

i have the catch can, with no lines .... need to know wat i have to buy

 

[TNVIPER]

I knew I forgot something........1/2" hose and a Tee connection. Run a hose from the right (facing engine) top front valve cover nipple to a tee where the left front valve cover nipple is. Connect the a hose from the left nipple to the tee. Connect a hose to the last connection on the tee and run to the catch can. So simple even FatJack could do it..

If I remember correctly the right side has a hose running to the TB on a stock setup (Roe does not). You will need to block that off at the TB.

 

[VIPER]

I knew I forgot something........1/2" hose and a Tee connection. Run a hose from the right (facing engine) top front valve cover nipple to a tee where the left front valve cover nipple is. Connect the a hose from the left nipple to the tee. Connect a hose to the last connection on the tee and run to the catch can. So simple even FatJack could do it..

If I remember correctly the right side has a hose running to the TB on a stock setup (Roe does not). You will need to block that off at the TB.

thanks bud !!! :rock: :rock: :rock: :rock: :rock: :rock: :rock: :rock: :rock:

 

[TNVIPER]

BTW...sent out priority mail this morning.

 

[VIPER]

BTW...sent out priority mail this morning.

ur the man bro, thanks a million !!!


so i just need to get some hose tee and clamps ?, or do i need a air breather as well " if it vented "

 

[TNVIPER]

The can has a little K&N breather filter with it. All you need are the hoses and clamps. Here is a picture of the hose that comes with the kit...

http://www.jmbperformance.com/images/srt10ramcai2.jpg

 

[LoveThisTruck]

Just give Justin (JMB) a call and buy the hoses/hardware.

 

[VIPER]

thanks !!!

cant want to get it