clutch, dual disk from dodge????

[scoobert]

Clutch Kit (Not Shown)
P5155122 Clutch Conversion Kit, Converts a 2005-06 Viper to a
2008 Dual Disc Clutch, Requires P5155123. Not
compatible on Vipers with a Flywheel Crank Trigger

will this work for us? is it worth it?

also noticed these

VIPER SRT10 POWER KIT
A. Engine Controller - Race
The Mopar Race Engine Controller for the Viper SRT10 is specifically
calibrated for use with the Race Camshaft (P4510171) and the Viper 3-
inch Race Exhaust (P4510176). It optimizes fuel and air tables for peak
performance without catalytic converters, removes the skip shift feature
(found on the production model), and is calibrated for premium pump
fuel (91 octane minimum). For race use only.
1 P4510172AB Engine Controller, Race, 2003–06 Viper SRT10
IMPORTANT NOTICE: This device is not legal for use on pollutioncontrolled
vehicles certified for use on streets or highways. Once this
device is installed, use of the vehicle on a street or highway is a
violation of the Clean Air Act, potentially subjecting the operator and the
installer to civil penalties of up to $32,500 per vehicle depending on the
circumstances.
B. Camshaft - Race
Based on the Competition Coupe camshaft. Uses production springs
and rocker arms to offer a 6-8 horsepower increase at top end of rpm
range. Recommended for use with Race Engine Controller
(P4510172AB) and 3-inch Race Exhaust (P4510176).
· Cam lift: 0.320" Intake and 0.320" Exhaust
· Duration at 0.050": 220.00 Intake/230.5 Exhaust
· Cam Centerline = 117° after top dead center
1 P4510171 Camshaft, Race, 2003–06 Viper SRT10

http://www.mo-pod.com/pdf/09_Performance_Catalog-120908.pdf

 

[Dom426]

nope will not work please try again

 

[scoobert]

any of it?

 

[Brat]

Get ahold of Justin at JMB he has what you need.

 

[Dom426]

Get ahold of Justin at JMB he has what you need.

wise words from a not so wise man

 

[Brat]

wise words from a not so wise man

Back at you sweetie.

 

[includemeout]

Back at you sweetie.

and a few words from a wise guy. hehe

 

[ARRESTmeRed04]

any of it?

our input shafts are different than the 08 vipers