clutch problem guys?

[RAMDUDE]

Ok so at 6 am I got into my truck to go to work, pushed the clutch petal in to start the truck.

Truck started and then clutch petal went limp with no pressure at all???

what is wrong to make this happen like that.

It's like you can press up and down with no effort at all.

thanks guys

 

[FATJACK]

Check the hydraulic fluid in the resevoir on the firewall probably empty. Fill with brake fluid and pump it several times, should be ready to go.

 

[viperhauler]

do what jack said(this time)

also check for leaks...could be a slave cylinder...

 

[RAMDUDE]

ok I tried that guys to no prevail.

I'm thinking slave as well, going to order the roe kit plus a new clutch, looking at the centerforce clutch.

Anyone have any info on why the chromoly flywheels only fit 05-06 not 04 ?

 

[viperhauler]

is your truck stock?

 

[TNVIPER]

ok I tried that guys to no prevail.

I'm thinking slave as well, going to order the roe kit plus a new clutch, looking at the centerforce clutch.

Anyone have any info on why the chromoly flywheels only fit 05-06 not 04 ?

Dont waste money on a CenterForce...the OEM clutch is about as good....If you want a clutch that will hookup like crazy glue then look at a SPEC from JTS Venom Performance...costs less too..

 

[RAMDUDE]

is your truck stock?

No has few mods done to it.

I placed a order at roe tonight for the alum flywheel, centerforce clutch and hydraulic upgrade kit.

hopefully all this works out good.

 

[Dom426]

No has few mods done to it.

I placed a order at roe tonight for the alum flywheel, centerforce clutch and hydraulic upgrade kit.

hopefully all this works out good.

:congrats: :congrats: :congrats: :congrats: :congrats: :congrats:
you should like it!!!!!