Clutch Problem

[EsArTe10]

My clutch pedal is not coming up from tha floor fully... and shifting is terribly rough!!causing me only to pull off in 2nd.....ANY HELp is GOOD HELP>!?:dontknow:

 

[JTS VENOM PERFORMANCE]

My clutch pedal is not coming up from tha floor fully... and shifting is terribly rough!!causing me only to pull off in 2nd.....ANY HELp is GOOD HELP>!?:dontknow:

need to replace or upgrade the clutch hydraulics, via JMB justin,

 

[QuickSilver]

Well we can start by checking the fluid level. Make sure there's no leaks.
Make sure you got that 600/degree fluid in there. Special high-temp clutch fluid. Several of our vender's here sell it.

Quick

 

[JRSVIPR]

My clutch pedal is not coming up from tha floor fully... and shifting is terribly rough!!causing me only to pull off in 2nd.....ANY HELp is GOOD HELP>!?:dontknow:

Sounds like the slave.

 

[EsArTe10]

Thanks Fellow Members..will do

 

[EsArTe10]

Any one kno how much tha hydraulic is to replace?

 

[Dom426]

Any one kno how much tha hydraulic is to replace?

http://jmbperformance.com/store/product_info.php?cPath=66_113_106&products_id=311

 

[Django]

Looks like the boys got the situation well in hand......

Well done, boys... :congrats:

NEXT.......?

D

 

[OSO]

Looks like the boys got the situation well in hand......

Well done, boys... :congrats:

NEXT.......?

D

Well i bought this kit last week and cant figure out where it goes or what to hook it up to!!!

 

[EsArTe10]

Kit for what?

 

[Venom Power]

Clutch pedal not coming up fully..? I'd have to say it's the failed slave. Upgrading the system would be the way to go. Clutch pedal up but engages clutch only close to the floorboard..? Recent experience taught me no hydraulic fluid and air in lines. It's back to working fine after OSO paid a visit. Now if I can only take care of that left pinky toe itch..

 

[EsArTe10]

LOL..but yea tha shop is telling me i nedd a new clutch which is impossible because i can go into every gear once tha truck is moving

 

[OSO]

Kit for what?

The kit for the viper slave it just wont fit the 727 and there is no pedal to hook it up to useless mod

Clutch pedal not coming up fully..? I'd have to say it's the failed slave. Upgrading the system would be the way to go. Clutch pedal up but engages clutch only close to the floorboard..? Recent experience taught me no hydraulic fluid and air in lines. It's back to working fine after OSO paid a visit. Now if I can only take care of that left pinky toe itch..

Antnee was having problems with his little rubber thing and i had to show him how to put it on . Surprised he doesn't have more kids:marchmellow:

 

[EsArTe10]

OH OK...come to find out it is tha Cylinder that i need to replace

 

[OSO]

OH OK...come to find out it is tha Cylinder that i need to replace

I was bringing humor to the thread , you know none of the stuff you needed

 

[Venom Power]

Antnee was having problems with his little rubber thing and i had to show him how to put it on . Surprised he doesn't have more kids:marchmellow:

:laugh:LMAO!!!

 

[jsandlin]

I was bringing humor to the thread , you know none of the stuff you needed

EsArTe10 meet OSO AKA James. Dont worry you'll catch on and have to decipher when he is being humorous or not. Good luck:congrats:

 

[OSO]

EsArTe10 meet OSO AKA James. Dont worry you'll catch on and have to decipher when he is being humorous or not. Good luck:congrats:

Sorry my serious key is stuck on my keyboard

 

[EsArTe10]

LOL too funny

 

[EsArTe10]

Trucks up and Running again,,just needed tha right Clutch Fluid...:burnout: