comp cam

[cyalata]

brand new in box specs box let go for 350.00 plus ship or from my hands to urs in pcb

http://www.compperformancegroupstor...&Product_Code=97-320-10&Category_Code=V10Cams

http://www.compcams.com/Cam_Specs/CamDetails.aspx?csid=770&sb=2

 

[Ironhead]

that link does not work :dontknow:

 

[cyalata]

that link does not work :dontknow:

fixed it sry bout that

 

[Ironhead]

same cam i have in my truck now :rock:

 

[cyalata]

same cam i have in my truck now :rock:

i was goin to run it but since im taking the s/c off and goin turbo i dnt see this bein the right cam for me

 

[Ironhead]

i was goin to run it but since im taking the s/c off and goin turbo i dnt see this bein the right cam for me

you are right it is a N/A ,,,wont work that great with S/C or turbo

 

[cyalata]

you are right it is a N/A ,,,wont work that great with S/C or turbo

yea hoping i can get it in the hands of n/a build i believe the price is pretty good, gotta start moving stuff for the wifey will let me order the turbos etc

 

[kickinassrt-10]

What will a cam do and is it saw on stock engine?

 

[cyalata]

What will a cam do and is it saw on stock engine?

its all in what u want a cam will had hp to ur truck how much i dont know, u would prob want to do a tune on the truck after the install and maybe a exhaust so u can hear the cam a lil more. ironhead has this cam in his truck jus dnt know what all it done for him my first intentions in my truck was to stay n/a but i blew that with the roe and now im goin turbo :dontknow:

 

[Ironhead]

What will a cam do and is it saw on stock engine?

Not sure what saw on an engine is ,,,lolK/K

with pp heads and cam i gained almost 40 to 50 hp on a cold day on a dyno ,,tune is is a must !

 

[cyalata]

bump bump bumo

 

[FastRam]

Is the spec sheet correct? The engine family listed is 1992 - 2002 V-10. :dontknow:

 

[cyalata]

Is the spec sheet correct? The engine family listed is 1992 - 2002 V-10. :dontknow:

i dnt know why it says that if you go to there site and look at viper truck u will see the camshaft at the bottom, i dont know if the camsaft change a whole lot between the years i know ironhead is running the same camshaft so it must work

 

[Bone]

It is a good camshaft for our trucks. A steal at 350. Probably 550 new.

 

[Tooloe]

yes this is a steal for the price.. i'm running custom cam based off of this cam and i love it!

 

[Troy's QC SRT]

I'm going to have to pass on the cam bro, my builder said that i'll be going with a cam a little bigger than that

 

[cyalata]

bump new price 300 plus shipping!

 

[Tooloe]

I'm going to have to pass on the cam bro, my builder said that i'll be going with a cam a little bigger than that

some times bigger isn't better! hahaha:rock:

 

[1fast10]

Just bought the nitrous or I'd be all over it. What all do you have to do to the heads cause it says you have to modify them???? and what other components do you have to upgrade. Basically what I'm asking is how much will a cam install set you back total? I had a cam in my ws-6 and my power steering was pretty much gone due to the low idle...

 

[cyalata]

Just bought the nitrous or I'd be all over it. What all do you have to do to the heads cause it says you have to modify them???? and what other components do you have to upgrade. Basically what I'm asking is how much will a cam install set you back total? I had a cam in my ws-6 and my power steering was pretty much gone due to the low idle...

to be honest bud have no idea what all would need modded pm ironhead i know hes running the identical cam in his truck, ive not swapped the cam in my truck yet so wish i could give you a better idea but then id be lying