Complete OEM Throttle Body needed

[ViperTruck2933]

I need a complete OEM TB (one that still has the bearings and blade in it).

Anybody have one they want to sell?

TIA

 

[TNVIPER]

I hadnt give it any thought..I have the Billet coming from Roe probably friday...I guess it comes complete...I'll sale ya my OEM as long as the Roe has everything..

 

[SANCHOBA]

i think with the ROE,you will need to re-use the stock bearings.

 

[Bone]

I will have an extra ported one soon.

 

[Marc T]

I hadnt give it any thought..I have the Billet coming from Roe probably friday...I guess it comes complete...I'll sale ya my OEM as long as the Roe has everything..

You will need your Bearings and Spindle!!

 

[TNVIPER]

Thanks for clearing that up Marc & Sanchoba.....I didnt think about what parts came with the Roe....well, I guess the OEM will make a great paper weight..

 

[ViperTruck2933]

I will have an extra ported one soon.

Thanks, but I don't need a ported one. I am just going to use the bearings out of it. I don't want to take the bearings out of my PBJ ported OEM one to use on the Roe.

I am also looking for one as cheap as possible.

 

[Kevan]

Why not just purchase new bearings instead of an entire TB?

 

[Muzzy]

GB on TB bearing? :laugh:

 

[ViperTruck2933]

Why not just purchase new bearings instead of an entire TB?

I am told they are difficult to find and not cheap.

Shouldn't be too hard to find someone who put in an X-Metal and buy their old one. X-Metal's comes with the bearings already in them.

 

[RUFROZN]

you have to transfer all the goodies out of your stocker less the butterfly disks to include your tps. i went to dodge to just buy the parts that were used on my Xmetal and you cannot get them seperately- you have to buy a new one complete- $720 bucks- BE carefull with the small screws on the rods where the butterfly disk/valve attach they are sensitive suckers -TAKE YOUR TIME with them.:burnout: :burnout: :burnout: :rock:

 

[Kevan]

I am told they are difficult to find and not cheap.

Shouldn't be too hard to find someone who put in an X-Metal and buy their old one. X-Metal's comes with the bearings already in them.

It just seems like buying a whole new engine simply for the oil filter.

If anyone wants to send me a set of the OEM bearings, I'll spec them out and find a source for new/better ones.

 

[ViperTruck2933]

There is no need to further complicate the issue on this. (I know everyone is trying to help and I appreciate it, though).

If someone has an OEM TB with bearings that they'd like to sell, I'd like to buy one. Let's keep it that simple. :rock:




Thanks.

 

[blackviper]

I have a throttle body with the bearings in it. No butterfly disks or rod. Basically the housing with the bearings. No damage and was on the truck for approximately 4000 miles.