Crossed drilled rotors at SumitRacing

[Viper7777]

Just checked Summitracing.com Says on there website they have them listed for SRT-10 8.3 l

Swears on there site they are for Ram SRT-10 dont know :dontknow:



Here is some info if anyone is interested.

SUM-DSEP-67053CL $109.95
Estimated Ship Date: Today
Application Warranty Show All

Brand: Summit
Product Line: Summit Extreme Performance Cross-Drilled and Slotted Brake Rotors
Intended for Street Use: Yes
For Use with Stock Calipers: Yes
Rotor Construction: Vented
Rotor Style: Cross-drilled and slotted surface
Rotor Material: Iron
Rotor Finish: Natural
Quantity: Sold individually.

Brake Rotor, Cross-Drilled/Slotted, Iron, Natural, Left Front, Dodge, Ram 1500 Pickup/Durango, Each

Check to make sure this part fits your application
Maximum stopping power from Summit.
Summit Extreme Performance cross-drilled and slotted brake rotors are manufactured on CNC machines using CAD-CAM design for perfect balance and alignment. These rotors provide you with maximum stopping power, reduced warping, and longer life. The cross-drilled holes and slots provide an exit route for gasses and dust, resulting in better heat dissipation and less brake fade under hard use. Other solid-surface rotors allow gasses to create a cushion between the pad and the brake rotor, resulting in poor brake performance. The cross-drilled holes and slots clear away harmful gasses, restoring full pad-to-rotor contact. These rotors are a terrific performance upgrade when replacing your OE rotors.

Here is the link http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUM%2DDSEP%2D67053CL&N=4294908110+4294907804+4294924385+4294838883+115&autoview=sku

 

[Blakewilder]

Somebody confirm and im in.

 

[RedRamRules]

Linky please, I am very interested

 

[drcraig]

I doubt it, especially considering that they also make them for the 4WD version of the SRT 10 8.3

 

[Django]

I just called Summit. They confirm that these rotors fit the 2004 SRT-10 truck.

Blake I didn't ask about your 05 model...sorry bro....

SD

 

[silverqc]

not gonna work just called they have the wrong info listed no parts for our trucks

 

[silverqc]

so then somebody one there end has no clue whats up we have 16 and 14 inches that is

 

[Django]

so then somebody one there end has no clue whats up we have 16 and 14 inches that is

Yeah they rilly screwed up then, cuz it sez 2004 SRT-10 truck right on the screen... bozos...

Thanks for the even better follow up....

sD

 

[Rice Eater]

$hit so what is the deal we have on confirmed and one that says no go!? I desperately need a replacement for on of my rear rotors...its cracked in 3 places!

 

[ROKTMAN]

so then somebody one there end has no clue whats up we have 16 and 14 inches that is

Err...
15" front and 14" rear.

 

[ROKTMAN]

If you have access to a CNC machine it is simple to do.I am doing mine SA and it will be $70.00-$105.00 for all four depending on what indexing the machine has/time wise.

 

[silverqc]

no i did call was told srts trucks were bigger( i knew that )and the ones they have fit a reg ram .so go on order them please tell me if they fit cause at 110 + shippen each i am in for sure

 

[RedRamRules]

I think I am going to go with Steve Austin and have him cross drill and powdercoat my rotors. I have no patience for these companies who claim to have parts and end up causing more confusion than anything.

 

[silverqc]

14 and 15 ahhh was asken wast sure

 

[silverqc]

I just found out that my possible connection will be out of town until mid July. The only thing I can do for you is drill, slot and zinc plate some stock rotors for you. If you can send them to us we can do that for you. Thanks [email protected]

 

[silverqc]

i asked them just the other day held on to it from someone else a while back

 

[Steve Austin]

No manufacturer is producing rotors or blanks for the srt 10 at this time. I have personally spoke to all of them (brembo,trw,baer,ebc,powerstop) and it is not looking good right now. Not enough demand plus the blanks are big bucks. EBC did say they were going to produce them then stopped the production run. I have emails from ebc director saying they were a go then saying that it was not going to happen. Either way the ebc rotors are not aggressive anyway.

We are the only ones right now producing the drilled rotors.

Steve Austin

 

[vpr hler]

I have ordered cross drilled and slotted rotors for my 05 QC from Centric. They say it fits the OEM's. Will know by next week when they come and hopefully fit.

 

[silverqc]

please let us know , i have been looken for ever only thing i have found is send mine out will take a few weeks to get them done , dont wanna be down for two weeks or more

 

[Blakewilder]

If U r in FL....Competition brake and rotor are doing mine, powdercoated for a little more money but u dont have to ship thru customs....Steves are the best price tho..