Does anyone know who built this motor?

[SANTEEN]

Are the rods forged also? The mains are stock for sure.

You could tell the main bearings are stock, by looking at the pics?:dontknow:

 

[kyle's srt10]

You could tell the main bearings are stock, by looking at the pics?:dontknow:

Look at the 4th picture from the bottom Those are stock cast mains Billet mains are very noticeable..

 

[DevilDawg3097]

Are the rods forged also? The mains are stock for sure.

no that I look again, Doesnt look like they are, look like stockers. You can tell on those also. but the pistons are for sure.

 

[SANTEEN]

So how is an 04' RC engine going to bolt up to your 06' QC?:dontknow: I didn't think a RC engine would work in a QC.

After doing some research. I think you're right. From what I've been told, a QC engine can be made to fit in RC. But RC engine would be a pain to bolt to our auto trans.

 

[DevilDawg3097]

make a 6spd quad cab that would be easier.

 

[kyle's srt10]

make a 6spd quad cab that would be easier.

That would be cool!!:rock: Then have a custom 1 piece driveshaft made..

 

[DevilDawg3097]

Shit that hasnt been done yet has it? everybody is doing the other way around I would bet with the extra weight that basturd would hook pretty good:burnout:with a 4.10 and 6spd

 

[kyle's srt10]

Wonder if you could make this engine work in an 06'??:dontknow: :hmmmm: :idea: