Dropped the "10"!!

OnceBit

Full Access Member
Joined
Mar 9, 2011
Messages
744
Reaction score
6
Location
Arkansas City, KS
Stinker's Venom Series Extreme Drop Kit:

BEFORE:
BEFORE02.jpg

AFTER:
AFTER04.jpg


BEFORE:
BEFORE04.jpg

AFTER:
AFTER01.jpg


BEFORE:
BEFORE03.jpg

AFTER:
AFTER03.jpg


Oh ya....I'm liking it!
 
looks good man, that purple/grey goes good together. How much stiffer is the ride? and how much was the total drop? i really need to bring my front end down since i took all the weight off of it
 
Oh Yes!!

Lookin Real Good!
 
looks good man, that purple/grey goes good together. How much stiffer is the ride? and how much was the total drop? i really need to bring my front end down since i took all the weight off of it

It does have a bit of a firmer ride, but nothing thats uncomfortable. It has an even better performance feel to it especially since in the kit there are new front and rear energy suspension sway arm bushings. So far....love the difference! Should have been this way from the factory!

Total drop was just a tick over 6 after shipping, but not including the alignment that needs to be done afterwards. Installed everything in just about 3 hours, but I did have access to lift.
 
It does have a bit of a firmer ride, but nothing thats uncomfortable. It has an even better performance feel to it especially since in the kit there are new front and rear energy suspension sway arm bushings. So far....love the difference! Should have been this way from the factory!

Total drop was just a tick over 6 after shipping, but not including the alignment that needs to be done afterwards. Installed everything in just about 3 hours, but I did have access to lift.

cool, i meant how far it dropped it not price though:D
 
Everything about the extreme lowering kit is absolutely Awesome!! ..... Except that when,not if, you bottom it out , your wheels will wobble ! Poor axle setup! The axle flanges protrude to far past the bearing due to the drum type emergence brakes. I have replaced an axle on the driverside and it is wobbly already ! I bought another axle but won't change it again until it starts to bounce again.
 
Absolutely Bitch’n! :rock: Ooops, That just dated me! :D Really came out nice, I need to get mine done but can’t decide between 1-2 or 2-3…….:dontknow:
 
cool, i meant how far it dropped it not price though:D

LMAO....that just goes to show how much I WASN'T awake when responding. Its a 2 - 2.5 front, and 3 - 3.5 drop in back. As I've been driving it since the install last night I do see it settling in some more. Tucking those tires just a little tighter up on the front...
 
LMAO....that just goes to show how much I WASN'T awake when responding. Its a 2 - 2.5 front, and 3 - 3.5 drop in back. As I've been driving it since the install last night I do see it settling in some more. Tucking those tires just a little tighter up on the front...

cool, i'll have to bolt my drag tires on up front to make sure that much of a drop wont have the front end hitting the ground, should be fine but i just wanna double check
 

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Back
Top