FROM: DTS CUSTOM SERVICES
BASELINE AXLE ASSEMBLY TO INCLUDE:
COMPLETE HOUSING W/ ALL BRACKETS, AND BILLET STEEL HOUSING ENDS
NEW DETROIT LOCKER 35 SPLINE W/ 3 CHANNEL ABS PROVISIONS
NEW 35 SPLINE ALLOY AXLES W/ PRESSED ON WHEEL BEARINGS
(AFTERMARKET BRAKES MANDATORY! / STOCK DISK CANNOT BE USED.)
ALL NEW BEARINGS AND SEALS W/ SOLID CRUSH SLEEVE
CUSTOMER CHOICE OF GEAR RATIO
NEW 1350 SERIES YOKE AND STRAP KIT
STEEL REAR COVER (OR CUSTOMER SUPPLIED FACTORY COVER)
FULLY ASSEMBLED AND PAINTED BLACK
UNIT RATED TO HANDLE UP TO 1200 FLYWHEEL HORSEPOWER.
RETAIL $2675.00 (FORUM COST $2460.00)
OPTIONS:
FORD 11" DISK BRAKE KIT INSTALLED
$400.00 (FORUM $375)
__________________________________________________ __________
WILWOOD PRO-STREET PARKING BRAKE KIT
DRILLED, SLOTTED, PLATED ROTOR
BLACK CALIPERS
$820.00 (FORUM $775)
POLISHED OR RED CALIPER UPGRADE
$125.00
__________________________________________________ ________
CRYO RING & PINION
$200.00 (FORUM $175)
__________________________________________________ __________
T/A SUPPORT COVER W/ "DTS" LOGO
$160.00 (FORUM $145)
(this cover puts pressure on the bearing caps for more support)
__________________________________________________ __________
POWDERCOAT HOUSING
$150.00
MOST COLORS / CUSTOM COLORS WILL BE QUOTED!
__________________________________________________ _____________
__________________
These are the prices we can get the axles for and the options, there are more options if you can think of it, or find it on their site, we can get it.
Right now I am not going to become a vendor but if they we sell quit a few of them I will be glad to.
I did round off a few of the prices say if it was $137 to $140 that way I could make a donation to the forum with whats left over.
It should take 4-6 weeks to build an axle, maybe less.
Shipping will be extra.
I will need the axle paid up front.And the axle starts build when they recieve the $.
I also have the fix for the e brake which doesnt cost anything with the wilwood brake option.
I can get hardned u bolts for around $60
I can get a brake line kit for the wilwoods for $50, which is braided and made by goodridge.
This axle option will also allow for 15 rims for the track.
The Rc guys will benifit more from this until more QC guys start making real hp and start popping spyder gears.
But jsut for info for the qc guys we ordered Nowwhats with the spring mounts to mount the springs below the tube like an Rc, which would do away with the need for the rear flip kit. We will see how it works out.
WARNING: this is a performance axle,and the detroit locker is noisy around corners.***************************************
BASELINE AXLE ASSEMBLY TO INCLUDE:
COMPLETE HOUSING W/ ALL BRACKETS, AND BILLET STEEL HOUSING ENDS
NEW DETROIT LOCKER 35 SPLINE W/ 3 CHANNEL ABS PROVISIONS
NEW 35 SPLINE ALLOY AXLES W/ PRESSED ON WHEEL BEARINGS
(AFTERMARKET BRAKES MANDATORY! / STOCK DISK CANNOT BE USED.)
ALL NEW BEARINGS AND SEALS W/ SOLID CRUSH SLEEVE
CUSTOMER CHOICE OF GEAR RATIO
NEW 1350 SERIES YOKE AND STRAP KIT
STEEL REAR COVER (OR CUSTOMER SUPPLIED FACTORY COVER)
FULLY ASSEMBLED AND PAINTED BLACK
UNIT RATED TO HANDLE UP TO 1200 FLYWHEEL HORSEPOWER.
RETAIL $2675.00 (FORUM COST $2460.00)
OPTIONS:
FORD 11" DISK BRAKE KIT INSTALLED
$400.00 (FORUM $375)
__________________________________________________ __________
WILWOOD PRO-STREET PARKING BRAKE KIT
DRILLED, SLOTTED, PLATED ROTOR
BLACK CALIPERS
$820.00 (FORUM $775)
POLISHED OR RED CALIPER UPGRADE
$125.00
__________________________________________________ ________
CRYO RING & PINION
$200.00 (FORUM $175)
__________________________________________________ __________
T/A SUPPORT COVER W/ "DTS" LOGO
$160.00 (FORUM $145)
(this cover puts pressure on the bearing caps for more support)
__________________________________________________ __________
POWDERCOAT HOUSING
$150.00
MOST COLORS / CUSTOM COLORS WILL BE QUOTED!
__________________________________________________ _____________
__________________
These are the prices we can get the axles for and the options, there are more options if you can think of it, or find it on their site, we can get it.
Right now I am not going to become a vendor but if they we sell quit a few of them I will be glad to.
I did round off a few of the prices say if it was $137 to $140 that way I could make a donation to the forum with whats left over.
It should take 4-6 weeks to build an axle, maybe less.
Shipping will be extra.
I will need the axle paid up front.And the axle starts build when they recieve the $.
I also have the fix for the e brake which doesnt cost anything with the wilwood brake option.
I can get hardned u bolts for around $60
I can get a brake line kit for the wilwoods for $50, which is braided and made by goodridge.
This axle option will also allow for 15 rims for the track.
The Rc guys will benifit more from this until more QC guys start making real hp and start popping spyder gears.
But jsut for info for the qc guys we ordered Nowwhats with the spring mounts to mount the springs below the tube like an Rc, which would do away with the need for the rear flip kit. We will see how it works out.
WARNING: this is a performance axle,and the detroit locker is noisy around corners.***************************************
