dyno max

[bigike]

http://store.summitracing.com/partd...923429+4294922711+4294922710+115&autoview=sku


I saw these and i know that we dont need a cross over pipe, but i thought that it might make the exhaust sound better if the 2 banks were joined together instead of having 2 seperate 5 clys running next to each other.

My other option i'm looking at is 2 single chambered flows, I can get them for 25 a piece. And i think i would still instal a h-pipe
single chamber ebay

 

[Bone]

The crossover helps with scavanging the other side of the engine; maintaining a good even flow. I would believe the muffler will affect the sound to a greater extend if that is what you are looking for?

I don't know of anyone running true duals w/crossover pipe on the SRT-10 with two mufflers. It is a thought however.

Plus your link to the ebay auction is 2 1/2 ". You want a 3" system for a proper aftermarket performance install.

 

[bigike]

isn't our exhaust at 2.5"

 

[mmmmtorque]

isn't our exhaust at 2.5"

Believe the ID is 2 5/8" on the stock exhaust.

Most aftermarket is 3"